Sort by:
Date
Show: 2040100
sale
Designed for rapid non-destructive testing: •magnetic fields when testing of ferromagnetic products magnetic particle method; •radio interference; •compliance with the technical characteristics of equipment for
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Set (set) for visual control is designed for non-destructive testing visual-optical method in workshop, laboratory, field conditions using instruments and tools included in the kit. Set (set) is designed for
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for detection of underground utility installations, cable lines, pipelines, trace (definition of seat pads) of pipelines, cables and other communications at depths up to 10 meters. The locator (cabalistical)
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for non-destructive testing to detect surface and subsurface defects of various types of metal (ferrous) products and contructed. The device can detect defects types of cracks, voloviny, sinks, stratification,
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The measurement and recording in 12 standard channels of signals from sensors of temperature, humidity, pressure, flow, level and other sensors that register the technological parameters and alarm output for
Russian Federation, Chelyabinsk, Chelyabinsk
+7(351) 725-66-55
Show phone721-86-15
Show phone
sale
Designed for rapid non-destructive control of temperature and humidity, calculation of dew point temperature and the measured surface temperature of the contact method. Calculator dew point UCB KTR-1 measures:
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Provides for the measurement of time and the velocity of propagation of ULTRASONIC oscillations in solid materials (concrete, brick, composites) with pass-through and surface sounding and allows you to control
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The device allows controls the strength and uniformity of concrete (GOST 17624, Recommendations NIIZHB MDS 62-2.01), brick (GOST 17624) and other materials in end-to-end and surface sounding in products and
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The device allows controls the strength and uniformity of concrete (GOST 17624, Recommendations NIIZHB MDS 62-2.01), brick (GOST 17624) and other materials in end-to-end and surface sounding in products and
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Used in conditions when the power supply for control is impossible or forbidden normative documents. Has a flexible magnetic core. Magnetizing device UCB MTD-DC is designed to detect surface and subsurface cracks
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Viscometer VZ-246 is designed for rapid determination of viscosity (timeout) paint materials or related products - Newtonian or approaching liquids in accordance with standard GOST 9070-75. The viscometer is
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Purpose: The depth gauge is designed (depending on configuration): operational control of the focal depth of corrosion; depth control narrow holes and grooves Specifications: 1) measuring range, mm 0,05 -
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The instrument measures the elasticity, strength of coatings under bending around a set of cylindrical rods with diameters of cores from 1 mm to 20 mm The device complies with GOST R 52740-2007, GOST 6806-73
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: The device is a cylindrical brass vessel with a handle and three holes, two of which are located along the generatrix of the cylinder (the passport - side holes), and the third in the centre of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: A device for determining the strength of the film at impact. Available in two versions (cargo weight 1 or 2 kg). The design of the instrument Kick U1 made in accordance with modern requirements of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The device is designed to determine the adhesion and resistance to damage by scratching ASTM D 2197 "Method of determining the adhesion of organic coatings using scratching". The device meets the requirements of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: The device stamp Eriksen is designed to determine the elasticity and strength of the coatings when the Cup-shaped bend (hood cover Eriksen) according to GOST 29309 and ISO 1520. The device Eriksen
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive thickness testing: •products made of different metals, alloys and other materials with one-sided access during operation or manufacture; •thickness of glass, plastic, composite
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of the integrity of coatings with thickness up to mm in accordance with ASTM G62-A. Electrolytic universal flaw detector UCB ED-3D to control the porosity of the
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Adhesion devices compliant standards: GOST 15140, ISO 2409 ISO 16276-2, ISO 2409 DIN 53151, ASTM a 335, ASTM D 3002, BS 3900-E6, BS EN ISO 2409, NF T 30-038 Multiblade knife-adhesion devices designed to
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
