Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

Measuring the strength of building materials with the function of the detector UCB IPSM-U+T+D.

Offer type: salePublished: 27.03.2014
Seller:Lazarenko Dmitrij
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast', Novomoskovsk
The device allows controls the strength and uniformity of concrete (GOST 17624, Recommendations NIIZHB MDS 62-2.01), brick (GOST 17624) and other materials in end-to-end and surface sounding in products and structures, construction, process control, inspection of buildings, structures. Allows testing of concrete strength unknown composition according to the characteristics of CNIIMF. Has the function of determining the depth of cracks at surface sounding.
Measuring the strength and uniformity of concrete and other building materials by ultrasonic method UCB IPSM-Y+T+D is intended for:
•Detection of voids, cracks and defects arising during manufacture and operation of structures (for process control and inspection of facilities)
•Control the strength and uniformity of concrete (GOST 17624, guidelines MDS 62-2.01), brick (GOST 24332), construction and composite materials, structures, bridges and hydraulic structures
•Measure the depth of cracks in products and structures
•Determine the density and elastic modulus of operaview and fiberglass
•Definition audio index abrasives and building ceramics
•Evaluation of porosity, fracturing and anisotropy of materials
•Assess the degree of maturity of the concrete in monolithic concrete work
•the availability of imaging signal (a-scan)
•testing of concrete and other building structures subject to internal defects, discontinuities
•improving the accuracy of measurement of time intervals due to the possibility of manual selection when the meter
The advantages of measuring the strength and uniformity of concrete (building material) UCB IPSM-U+T+D.
•Calculating the strength, density and elastic modulus at a pre-established calibration curve;
•Calculating audio index abrasive products;
•Memory results;
•Communication with PC;
•Additional processing results using specialized computer programs.
•Non-critical results to the power of pressure transducers
•Ability to work on large databases sounding transducers for end-to-end testing
•Improved signal-to-noise
•Universal converters on radiation and reception with high efficiency
•High voltage excitation pulse
The increased power of the excitation pulse, high quality amplifer circuit can significantly increase the base sounding and work on materials with high attenuation.
The sensor surface sounding has base 120 mm, suitable for testing concrete cube samples.
Modification of measuring the strength of building materials UCB IPSM-U+T
•IPSM-The - simple modification to measure the strength of construction materials (concrete)
•IPSM-U+T - optionally allows the inspection of uniformity, durability of concrete, to measure the depth of cracks
•IPSM-Y+T+D is the most versatile model in which optional functions are implemented flaw detector for construction materials and structures
Technical characteristics of measuring the strength of building materials (concrete) UCB IPSM-U+T+D.
The range of measuring the time of propagation of ULTRASONIC oscillations, MX...999,9
The measurement resolution of the time of propagation of ULTRASONIC oscillations, MX,1
Operating frequency of the ULTRASONIC pulses, 60 kHz and 100
Base measurements at surface sounding, 120 mm
The excitation voltage, up to 600
Overall dimensions, mm Hg
Operating temperature range, ° C-20C...+40C
Power supply 2 battery type AA
The continuous operation time, hrs, menee
Weight of electronic unit with battery, no more kg,2
Supplied with measuring the strength of concrete (building material) UCB IPSM-U+T+D.
•electronic unit
•the sensor surface sounding kit with cables
•control sample
•2 rechargeable batteries with charger
•passport user manual
Additional options to order
•Set of converters for end-to-end testing
•Cone, waveguides, extension cables,