Sort by:
Date
Show: 2040100
sale
Adhesion devices compliant standards: GOST 15140, ISO 2409 ISO 16276-2, ISO 2409 DIN 53151, ASTM a 335, ASTM D 3002, BS 3900-E6, BS EN ISO 2409, NF T 30-038 Multiblade knife-adhesion devices designed to
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive thickness testing: •paint and other dielectric (mastic, andnoise, plastic, Teflon, radioparadise and so on) and galvanic coatings on steel; •paint and other dielectric (mastic,
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: The device is a cylindrical brass vessel with a handle and three holes, two of which are located along the generatrix of the cylinder (the passport - side holes), and the third in the centre of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The instrument measures the elasticity, strength of coatings under bending around a set of cylindrical rods with diameters of cores from 1 mm to 20 mm The device complies with GOST R 52740-2007, GOST 6806-73
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Hardness dynamic UCB T-D1 Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Durometer shore is suitable for measuring the hardness of rubber on the surface of products in accordance with GOST 263-75. The hardness tester conforms to standards: ISO 7619 and ISO 868, DIN53505, ASTM D2240
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
UCB T-UD3 is the world's first Durometer with images of the test object and the further binding toughness values indicating the place on the product. The main advantage of this hardness tester is 88 combinations of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Standard samples are intended to ensure the reliability and consistency when ultrasonic inspection of the company as at serial production and testing technologies for production. All standard samples of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
We manufacture transformers for General and special purpose, standard and under the order: straight, slanted, dual, ground and other All transducers can be used with ultrasonic flaw detectors of domestic and
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Durometer shore is suitable for measuring the hardness of rubber on the surface of products in accordance with GOST 263-75. The hardness tester conforms to standards: ISO 7619 and ISO 868, DIN53505, ASTM D2240
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed to detect defects such as the violation of the continuity and homogeneity of the materials semi-finished products, finished products and welded joints, to measure the depth and coordinates of their
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Measure the hardness of an exemplary 2 category according to GOST 9031-75 are intended for calibration of instruments measuring the hardness of metals by the methods of Brinnel, Vickers, Rockwell, Super-Rockwell and
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Universal hardness tester Brinell, Rockwell, Vickers hardness is suitable for measuring the hardness of ferrous and non-ferrous metals and hard alloys Brinell, Rockwell and Vickers. Hardness of the CU-BRW can
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed to measure the hardness of products from alloys, hardened steels and metals under laboratory conditions. The Brinell Hardness Tester. The main advantages compared with previous models: •Higher accuracy
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Stationary digital Durometer for Micro Vickers UCB TC-MAC is designed to measure the micro hardness Vickers. The hardness tester is equipped with a large contrast display, easy and simple in setup and operation.
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Stationary hardness Rockwell TC-R is designed for measuring hardness of metals and alloys in laboratory conditions. Stationary hardness tester is used for manufacturing workers measures the hardness of portable
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
