Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

The ultrasonic hardness tester UCB T-U1

Offer type: salePublished: 24.03.2014
Seller:Lazarenko Dmitrij
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast', Novomoskovsk
Designed for rapid non-destructive testing of hardness:
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
The ultrasonic hardness tester implements the method of the ultrasonic contact impedance (UCI). The hardness tester is indispensable for measuring the hardness of thin and light products from metals and alloys.
Advantages of ultrasonic hardness tester UCB T-U1
•measurement of hardness of any mass products with thickness from 1mm - not available for dynamic hardness testers (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, control, metallic coatings, and so on)
•small print on the surface of the product (it is possible to control the mirror surfaces, journals of crankshafts, knives and so on)
•wide range of hardness measurement
•convenience and ease of measurement
•the minimum number of controls Durometer
•graphic display with backlight, monitoring the status of the battery
•automatic detection of the sensors, indication of the type connected to the Durometer of the sensor
•specialized nozzle for sensor Durometer
The ultrasonic hardness tester T-U1 is the basic model of ultrasonic hardness tester. This hardness tester allows you to measure the hardness of not only solid products, but the hardness is small and light parts and pieces. The hardness tester equipped with a sensor with a special nozzle that allows you to use Durometer both on flat and cylindrical surfaces. Removing the nozzle from the sensor of the hardness tester can measure the hardness in hard to reach places, for example, gear teeth, drinking in the slots. Durometer easy to use, allows you to accurately measure the hardness according to Rockwell, Brinell, Vickers has a calibration mode to set the user scale of hardness. Hardness differs from other ultrasonic hardness testers Viscom quality, accuracy and low cost.
Limitations of ultrasonic hardness tester UCB T-U1
Limited use of ultrasonic hardness tester to measure products with a coarse-grained structure (e.g., cast iron) or weighing less than 10g, or thickness less than 1 mm
Modification of the universal hardness tester UCB T
The hardness tester universal UCB T-U1 - ultrasonic hardness tester.
The hardness tester universal UCB T-D1 - dynamic hardness tester.
The hardness tester universal UCB T-UD1 - combined (ultrasonic and dynamic) Durometer.
Modification of the ultrasonic hardness tester T-U1 and Durometer of dinamicheskim-1 can be upgraded to a modification of hardness combined T-UD1 by purchasing an activation code and an additional sensor for measuring the hardness of the missing method.
Specifications of ultrasonic hardness tester UCB T-U1
The range of hardness measurement
Rockwell,HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
The basic error of measurement of hardness:+/- 2 units HRC
+/- 10% HB
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -5 to + 40
Power supply 2 batteries type AAA
The continuous operation time, hrs, menee
Weight of electronic unit with battery, no more kg,2
The delivery of ultrasonic hardness tester UCB T-U1
•the electronic hardness tester
•sensor ultrasonic hardness tester T-U1
•2 rechargeable batteries with charger
•passport user manual
•cables to connect to the hardness tester