Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

Dynamic hardness UCB T-D2

Offer type: salePublished: 24.03.2014
Seller:Lazarenko Dmitrij
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast', Novomoskovsk
Designed for rapid non-destructive testing of hardness:
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
Dynamic hardness tester implements the method of the rebound method (Liba). Compared with dynamic hardness tester T-1 has a memory, PC link and operable to minus 20 degrees.
Advantages of the universal hardness tester UCB T-D2:
•measure the hardness of materials with heterogeneous, coarse-grained structure, forged products, castings, cast iron, large-sized products
•high performance and speed measurement of hardness
•lower (compared to ultrasolve a Durometer) cost
•wide range of hardness measurement
•convenience and ease of measurement
•the minimum number of controls
•large graphic display with bright backlight
•automatic sensor recognition
•indication of the type of connected sensor
•monitoring the status of the battery
•extended temperature range (hardy to -20 degrees Celsius indicator)
•the presence of internal memory and a communication channel with PC
•new, intuitive menu with tooltips on buttons
Dynamic hardness tester T-D2 advanced model of the dynamic hardness tester T-1. Hardness dynamic T-D2 is saving mode control results in the memory device is able to transmit the results of measurement of hardness on the computer, working in a wide temperaturea range. These hardness tester is indispensable if you want to measure the hardness of large-sized products in the winter. The hardness tester has a contractual display with bright backlight. For measuring the hardness of a wide range of metals and alloys the hardness tester has a calibration mode user scales of hardness.
The range of hardness measurement
Rockwell, HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
Basic measurement error:+/- 2 HRC units;
+/- Ed. HB
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -20 to + 40
Power supply 2 battery type AA
The continuous operation time, hrs, 20
Weight of electronic unit with battery, no more kg,2
Restrictions when using dynamic hardness tester T-D2
Measurement items weighing less than 3 kg or thickness less than 12 mm is possible only if the following conditions are true:
•the product must be TIGHTLY peterto to the surface of the support plate weighing at least 5 kg
When measuring magnetic steels error may increase due to the influence of the magnetic field were on the reading speed of movement of the striker inside the coil inductance sensor Durometer.
•the electronic hardness tester (type - by agreement with the buyer)
•2 rechargeable batteries with charger
•passport user manual