mechanical equipment » Advertisements

Advertisements (58)

Products (282)

Companies (60)

Category > equipment and materials > industrial equipment > mechanical equipment

Filter:

All

buy

sale

rent

exchange

other

services

2010-08-27

Japan, Estonia, Ukraine, Uzbekistan, Turkey, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Lithuania, Latvia, Kyrgyzstan, Kazakhstan, Europe, Other, Denmark, Georgia, Holland, Belarus, Armenia, Azerbaijan, Australia

2010-07-08

Australia, Azerbaijan, Armenia, Holland, Georgia, Denmark, Other, Europe, Kazakhstan, Kyrgyzstan, Latvia, Lithuania, Moldova, Russia, SNG, Tadjikistan, Turkmenistan, Turkey, Uzbekistan, Estonia, Japan

we sell machine-tools 2010-05-12

Ukraine

We sell the special fine-boring machine-tools of 1989 of producing : OS.2777 In 2227 OS.2777 In 2228 Did not work, complete, technical documentation is present. Лоботокарный machine-tool of 1А693

Foundry equipment, foundry floors, foundry plants by Lost - foam casting on turn - case base 2010-04-21

Australia, Azerbaijan, Armenia, Belarus, Holland, Georgia, Denmark, Other, Europe, Kazakhstan, Kyrgyzstan, Latvia, Lithuania, Moldova, Russia, SNG, Tadjikistan, Turkmenistan, Turkey, Uzbekistan, Ukraine, Estonia, Japan

Design and Project full range of Lost - foam foundries on turn - key base ; - castings made of cast iron; steels; Al and Cu - base alloys; - weight range: 0,1...5 000 kgs.; - design and Project Lost - foam foundries capacity: 500...20 000 MT of ...

LW1A4080N0A1 SlimLine - Low Cost - LW1 “clock and direction” drives 2010-04-07

Europe, Latvia, Lithuania, SNG, Estonia

LW1A4080N0A1 Hardware Controlled Full Digital Microstep Driver of 2/4 phases step motors Technical Characteristics • Power supply : 36 –:- 100 Vac; • Phase current : 1.0 –:- 8.0 Arms (1.4 –:- 11.2 Apeak); • Driver type : bipolar chopper; • ...

LW1D4080N0A1 SlimLine - Low Cost - LW1 “clock and direction” 2010-04-07

Estonia, SNG, Lithuania, Latvia, Europe

LW1D4080N0A1 Hardware Controlled Full Digital Microstep Driver of 2/4 phases step motors Technical Characteristics • Power supply : : 48 –:- 140 Vdc; • Phase current : 1.0 –:- 8.0 Arms (1.4 –:- 11.2 Apeak); • Driver type : bipolar chopper; • ...

LW1D2042N081 SlimLine - Low Cost - LW1 “clock and direction” drives 2010-04-07

Estonia, SNG, Lithuania, Latvia, Europe

LW1D2042N081 Hardware Controlled Full Digital Microstep Driver of 2/4 phases step motors Technical Characteristics • Power supply : 24 –:- 36 Vdc; • Phase current : 0.2 –:- 4.2 Arms (0.3 –:- 6.0 Apeak); • Driver type : bipolar chopper; • ...

SpeedFeeder 40/60 T2 2010-02-26

Ukraine, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kazakhstan, Belarus, Armenia, Azerbaijan

For handling metal parts in presses. Flexible – several areas of application. Quick – optimized for use in and around presses. Integrated vacuum system – low energy costs.

Blank Destacker BF 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

For separating, lubricating and positioning metal blanks. Transport using gripper – reliable feed process. Pallet right on the floor – simplifies blank loading. Modular design – easy to install.

Blank Feeder HSD 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

For separating, lubricating and positioning metal blanks. Automatic switching between pallets – uninterrupted production. Short cycle time – high production rate. Portable control panel – simple setting. Portable control panel – simple setting.

Shuttle SH 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

For fully automated movement of parts for automated presses. Quick coupler for fixture – short changeover time. Installed directly on the floor – simple to install. Few component parts – easy to maintain.

Maxilub 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

Hydroforming with Pressure Dome - HMU 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

HMU provides the ideal method for producing parts with complex shapes in one operation. Also suitable in situations when high demands for surface and tolerances are required. The forming principle of a HMU unit is based upon creating a high pressure ...

Hydroforming with Diaphragm - HMD 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

Press equipped with a pressure dome an oil-supported diaphragm in the slide. The press is specially developed for advanced forming of complex deep-drawn sheet metal parts. A forming cylinder with a punch is coming from below and forms the part ...

Hydroforming Press HF 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

HF is a hydroforming press and a part of the unique hydroforming module concept from AP&T. AP&T manufactures and markets hydroforming presses with locking forces of up to 200,000 kN. Hydroforming means that metal blanks are formed with high-pressured...

Blanking and Embossing Press LMB 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Holland, Belarus, Armenia, Azerbaijan

A short stroke hydraulic press designed for blanking, bending and embossing operations. Manufactured in both welded construction and with pre-stressed tie rods depending on the size. Press force range max 160 000 kN and max 4000 mm wide press table.

Deep Draw Press LPS 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

Specially designed to perform advanced deep drawing operations and hydromechanical forming. Can produce deep drawn parts in one single cycle.

Large Bed Press ZF 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Belarus, Armenia, Azerbaijan

Model ZF is a Large Bed Press suitable for large wide parts and designed to process many types of work including drawing, coining, stamping and forming operations. The frame modules are assembled with hydraulically pre-stressed tie rods which leads ...

Multi Purpose Press ODEN-F 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Moldova, Kyrgyzstan, Kazakhstan, Europe, Belarus, Armenia, Azerbaijan

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide range of manual or automatic production solutions. It is a four column press designed in a one piece welded steel frame based on FEA stress analysis and ...

Multi Purpose Press ODEN-WP 2010-02-26

Ukraine, Uzbekistan, Turkmenistan, Tadjikistan, SNG, Russia, Kazakhstan, Belarus, Armenia, Azerbaijan

This four column versatile hydraulic press is designed in a one piece Welded Plate steel frame (WP) based on FEA stress analysis. Suitable for drawing operations, punching, embossing and hydroforming with pressure dome. The slide is equipped with an ...

Filter:

All

buy

sale

rent

exchange

other

services