CNC Plasma cutting machine. Plasmart. (Plasma CNC) DSP controllers.
Offer type: salePublished: 27.06.2019
| Price: | 5 000 $ |
| Company: | FOP Glushkov |
| Seller: |  Sergej |
| Phones: |  0973913403 Show phone |
| Address: | Ukraine |
Industrial metal processing machine plasma cutting machine "CNC Plasma Р155" designed for cutting of sheet metal with the opportunity of obtaining the elements of an arbitrary contours.
Geometric characteristics.
Overall dimensions of machine mm 3500х2200х1000
Work surface mm 3100х1600
Cost from 4500 to 8000 Euro
Overall dimensions of machine mm 7000х3000х1000
Work surface mm 6100х2100
Plasma
Gas +Plasma
The cost from 10000 to 15000 Euro.
Cutting thickness mm 0,45 ― 30
Depend on the plasma source and plasma torch.
Cutting speed m/min 0 -12
Idle speed m/min 0-15
The accuracy of the machine 0,1 mm
Features of the machine
Movement - stepper motors + planetary gear.
Finding 0 - ohmic contact without the NEURON.
Height control - voltage. A separate controller DSP NEURON THC. 100 kHz Custom profiles modes cut from 0.45 mm to 30mm.
CNC control system Drive. A separate DSP controller. 100 kHz. + licensed software. Very large files upload, the stability of 99%.
Preparation of G-code Sheetcam.
The control rack is a separate unit. Russified SOFTWARE.
Extraction system - water baths, or sectional extractor.
Protection guides.
The modular system of the machine.
High survivability and maintainability.
Low maintenance.
1 year warranty. Post-warranty service.
Advice on the operation and cutting data - free.
Possible departure to the customer on the commissioning of machines and training of personnel.
PS Mach3 is a hobby.
The plasma source
Hypertherm, (recommended). On customer's choice.
Modernization of BU and Chinese plasma sources
pt.in.ua
https://www.youtube.com/watch?v=Xs1515Qppjw
Geometric characteristics.
Overall dimensions of machine mm 3500х2200х1000
Work surface mm 3100х1600
Cost from 4500 to 8000 Euro
Overall dimensions of machine mm 7000х3000х1000
Work surface mm 6100х2100
Plasma
Gas +Plasma
The cost from 10000 to 15000 Euro.
Cutting thickness mm 0,45 ― 30
Depend on the plasma source and plasma torch.
Cutting speed m/min 0 -12
Idle speed m/min 0-15
The accuracy of the machine 0,1 mm
Features of the machine
Movement - stepper motors + planetary gear.
Finding 0 - ohmic contact without the NEURON.
Height control - voltage. A separate controller DSP NEURON THC. 100 kHz Custom profiles modes cut from 0.45 mm to 30mm.
CNC control system Drive. A separate DSP controller. 100 kHz. + licensed software. Very large files upload, the stability of 99%.
Preparation of G-code Sheetcam.
The control rack is a separate unit. Russified SOFTWARE.
Extraction system - water baths, or sectional extractor.
Protection guides.
The modular system of the machine.
High survivability and maintainability.
Low maintenance.
1 year warranty. Post-warranty service.
Advice on the operation and cutting data - free.
Possible departure to the customer on the commissioning of machines and training of personnel.
PS Mach3 is a hobby.
The plasma source
Hypertherm, (recommended). On customer's choice.
Modernization of BU and Chinese plasma sources
pt.in.ua
https://www.youtube.com/watch?v=Xs1515Qppjw
