Bizator  /  Adverts  /  equipment and materials  /  industrial equipment
Sort by: 
Show: 2040100
Ball valve flanged full bore Genebre electric Rotork
negotiated  sale
Ball valve flanged full bore Genebre cast iron DN 1/2"-8" with Rotork actuator. High quality, affordable coupling ball valves Genebre will apply in as shutoff valves in systems of cold and hot water, heating,
Ukraine, Kyiv
Show phone
The three-way stopcock Genebre 316 stainless steel with electric Rotork
negotiated  sale
The three-way stopcock Genebre 316 stainless steel with electric Rotork The three-way ball valve Application: hot and cold water supply, food industry Diameter: 1/4" to 2" Pressure: 63 bar Temperature: -25
Ukraine, Kyiv
Show phone
Ball valve coupling stainless steel full bore 1/2”-2” with ROM drive
2
negotiated  sale
Ball valve coupling stainless steel full bore 1/2"-2" with ROM drive High quality, affordable coupling ball valves Genebre will apply in as shutoff valves in systems of cold and hot water, heating, etc. By
Ukraine, Kyiv
Show phone
The stopcock CSSS for gas, water, oil, steam and liquefied gas
2
negotiated  sale
Ball valve shut-off designed for steel install the shut-off device completely blocking the working medium flow in pipelines transporting gas, water cold, hot, oil, steam, liquefied gas and other slightly aggressive
Ukraine, Kyiv
Show phone
Ball valves for natural gas BALLOMAX
negotiated  sale
Basic parameters: DN: 10-500 Ru: up to 40 bar (depending on DN) T: -30 C to +90 Drive: manual, electric, portable Spindle: Standard, high (for insulation), Long (for installation in hard-to-reach pipes) Seals:
Ukraine, Kyiv
Show phone
Ball valves BALLOMAX
negotiated  sale
Basic properties: DN 10-500 Ru 40,25,16 Connection: welded, flanged Design: Valve body - Steel St 37, 0mm Ball - Stainless steel The saddle of the ball and the seal - PTFE + 20% carbon O-ring - triple ethylene
Ukraine, Kyiv
Show phone
Butterfly NAVAL
negotiated  sale
Main parameters: DN 350-700 PN 25,16 T to S (T over C possible with a special seal) Design: High-tech butterfly NAVAL metal sealing designed with good thermal tolerances and are used for shut off the flow,
Ukraine, Kyiv
Show phone
Ball valves for steam NAVAL
negotiated  sale
Ball valves for NAVAL steam palmerin seal designed for use as a shut-off valve in networks with a high temperature. Main parameters: DN 15 - 100; PN 40,25; T to +S; Connection: welded, threaded The types of
Ukraine, Kyiv
Show phone
Ball valves for natural gas NAVAL
negotiated  sale
Ball valve NAVAL specifically for natural gas developed in accordance with standard shut-off valves for natural gas pipelines. Main parameters: DN 10 - 300; PN 40,25,16; T to +200C; Connection: welded, threaded,
Ukraine, Kyiv
Show phone
Stainless ball valves NAVAL
negotiated  sale
Stainless ball valves designed for NAVAL use as shut-off valves for installation in pipelines various technological processes: acid-base tubes, the compressed air systems, pipes for raw and oxygenated water
Ukraine, Kyiv
Show phone
Steel ball valves NAVAL
negotiated  sale
Ball valve NAVAL is a shutoff valve with the relevant recommendation of the Union of Heat. It can to use heat, heat, oil pipelines and oxygen-free water. Main parameters: DN 10 - 600; PN 40,25,16; T to +200C;
Ukraine, Kyiv
Show phone
The stopcock SP flange-flange DN 150-200
negotiated  sale
Main technical data and characteristics Parameter name SP Figure Nominal sizes DN, mm 150 200 Nominal pressure PN, MPa (kg/cm2) 1,6 (16) The working medium water, steam, natural gas Working environment temperature,
Ukraine, Kyiv
Show phone
The stopcock SP flange-flange PN 2.5 MPa
negotiated  sale
Assignment Used as shut-off devices, fully blocking a flow of medium in pipelines Main technical data and characteristics Parameter name SP Figure Nominal diameter DN mm 25 32 40 50 80 100 Nominal pressure PN,
Ukraine, Kyiv
Show phone
The ball valve SP flange-flange PN 1.6 MPa
negotiated  sale
The main advantage of this model is the small construction size sohraneni high technical characteristics (ambient temperature from minus 30 to 200 0 C and pressure up to 1.6 MPa) Main technical data and characteristics
Ukraine, Kyiv
Show phone
The stopcock SP flange-flange PN 1.6 MPa
negotiated  sale
The stopcock SP is designed to ekspluatacii at a temperature of working environment from mine 30 to 200 0 C and the pressure PN 1,6 MPa. Crane equipped with electric drive or worm gear. Part name Brand material
Ukraine, Kyiv
Show phone
Ball valves lined blastomere DN 15 - DN 100 series SBV
negotiated  sale
Ball valves lined blastomere DN 15 - DN 100 series SBV (Swissfluid) Full bore ball valves series SBV are used as shut-off and control valves on pipelines transporting chemically active, aggressive and abrasive
Ukraine, Kyiv
Show phone
The steel ball valves for industrial systems Valpres
negotiated  sale
The steel ball valves series SPLIT-BODY DN15-DN200 VALPRES Used as shutoff valves in piping systems for industrial applications. Working environment: neutral and agressive liquids, crude oil and petroleum products,
Ukraine, Kyiv
Show phone
Ball valves cast iron flanged Brandoni
negotiated  sale
Ball valves flanged cast iron body series 02 / B2 DN15 - DN250 Brandoni Intended for use as shut-off valves in industry and heat and water supply systems. Working environment: hot and cold water, compressed air,
Ukraine, Kyiv
Show phone
Valves JIP-FF Danfoss two-position valves with flange connection
negotiated  sale
Valves JIP-FF Danfoss two-position valves with flange connection. The valves have been specially developed for centralized systems heating and hot water supply in which water is specially ocimene to avoid corrosion.
Ukraine, Kyiv
Show phone
Ball valves Danfoss steel JIP-FF flange with handle
negotiated  sale
Ball valves Danfoss steel JIP-FF flange with handle. Valves JIP-FF - off valves with flange connection. Cranes specially designed for centralized systems heating and hot water supply in which water ocimene order
Ukraine, Kyiv
Show phone