


4
http://img.bizator.com/a/2005622135/p3/1-machine-for-firewood-palax-power-90gs--procolon-.png|http://img.bizator.com/a/2005622135/p3/2-machine-for-firewood-palax-power-90gs--procolon-.png|http://img.bizator.com/a/2005622135/p3/3-machine-for-firewood-palax-power-90gs--procolon-.png|http://img.bizator.com/a/2005622135/p3/4-machine-for-firewood-palax-power-90gs--procolon-.png
12 500 EUR
sale
Machine B/y 2012 in very good condition ( very little work ) with a big ramp feed . The price of the new (FCA. Tallinn) — € 19.424 +ramp flow of € 7,200. Will give for 12500 Euro set: machine - automatic rail
Ukraine, Kyiv Oblast', Vasylkiv
90 000 UAH
sale
Wood crusher machine DP 660 T (Tabarka, depoprovera) Wood crusher machine DP 660 T (mounted on tractor) is designed for grinding of woodworking waste: lagging, rails, slabs, tops and branches of trees into
Ukraine, Poltavs'ka Oblast', Poltava
sale
Sell a line of granulation , sell components and assemblies to the line granulation .OGM-0,8. AVM-065, Granulator-0.8, conveyors, fridge and etc. more Detail by phone Contact person: Grigory Alekseevich

4
http://img.bizator.com/a/2005613939/p3/1-grinding-machine-kalibrovochny-stema-model-cl-110-italy.jpg|http://img.bizator.com/a/2005613939/p3/2-grinding-machine-kalibrovochny-stema-model-cl-110-italy.jpg|http://img.bizator.com/a/2005613939/p3/3-grinding-machine-kalibrovochny-stema-model-cl-110-italy.jpg|http://img.bizator.com/a/2005613939/p3/4-grinding-machine-kalibrovochny-stema-model-cl-110-italy.jpg
negotiated
sale
Grinding machine Kalibrovochny Stema model CL 110 Italy .Processing 1100mm one cone the tape with the combined node (Val+pneumotach with upravleniem start-end)Main motor 15kW.Airflow cone for Lena.Centration of

4
http://img.bizator.com/a/2005612018/p3/1-vertical-milling-machine-fssh-1a.JPG|http://img.bizator.com/a/2005612018/p3/2-vertical-milling-machine-fssh-1a.JPG|http://img.bizator.com/a/2005612018/p3/3-vertical-milling-machine-fssh-1a.JPG|http://img.bizator.com/a/2005612018/p3/4-vertical-milling-machine-fssh-1a.JPG
2 000 $
sale
Sell milling machine fssh-1A 1995 St. Dnipropetrovsk art factory. The machine is in excellent working condition (see photo). The engine is 4 kW, the shaft speed 3000-4500-6000-9000 rpm, mounting diameter 32

2
http://img.bizator.com/a/2005608651/p3/1-sale-band-sawmill-used-ash-vsg-1000-3-in-excellent-working-condition-price-72-000-usd.jpg|http://img.bizator.com/a/2005608651/p3/2-sale-band-sawmill-used-ash-vsg-1000-3-in-excellent-working-condition-price-72-000-usd.jpg
72 000 UAH
sale
Band sawmill used Ash VSG-1000-3 horizontal, with mechanized feeding of the sawing carriage. Sawmill band saw horizontal sawing Ash VSG-1000-3 designed for longitudinal sawing logs with a diameter up to
Ukraine, Sums'ka Oblast', Lebedyn


6
http://img.bizator.com/a/2005603146/p3/1-turning-and-copying-centauro-t5-rmc-1600mm.jpg|http://img.bizator.com/a/2005603146/p3/2-turning-and-copying-centauro-t5-rmc-1600mm.jpg|http://img.bizator.com/a/2005603146/p3/3-turning-and-copying-centauro-t5-rmc-1600mm.jpg|http://img.bizator.com/a/2005603146/p3/4-turning-and-copying-centauro-t5-rmc-1600mm.jpg|http://img.bizator.com/a/2005603146/p3/5-turning-and-copying-centauro-t5-rmc-1600mm.jpg|http://img.bizator.com/a/2005603146/p3/6-turning-and-copying-centauro-t5-rmc-1600mm.jpg
negotiated
sale
Distance between centres 1600 mm copy supports: 2 the shape of the steel cross supports: 1 The spindle speed min rpm: 900 The spindle rotation speed max rpm 4500 speed levels: 6 Copies of the sample blank: Yes
Ukraine, Sums'ka Oblast', Sumy
71 000 UAH
sale
Sell woodworking machine for four-sided machining width 30-160mm height of 10-100mm.For the manufacture of the lining, of condition, floor boards, moldings.Stepless feed rate. Model C16-1FThe year of 1992.Condition
Ukraine, Zakarpattia Oblast
1 UAH
sale
The main purpose derevozaschitnoe machine I 2 - crushing off-spec wastes of wood processing and lesozagotovke type: slab, rail, branches and tree tops. The resulting chips are used in the manufacture of
Ukraine, L'vivs'ka Oblast'
1 UAH
sale
The main purpose derevozaschitnoe machine, SRE 2 - crushing of off-spec wastes of wood processing and lesozagotovke type: slab, rail, branches and tree tops. The resulting chips are used in the manufacture of
Ukraine, L'vivs'ka Oblast'
sale
The main purpose of hammer mills IN 28/09 - grinding of chips and lump waste of non-conforming woodworking and logging, resulting in the production of lumber and plywood, as well as pieces of bark, into a
Ukraine, L'vivs'ka Oblast'
sale
Crusher hammer ДМ8 - designed for additional grinding of the fuel and technological wood chips, shavings, grain, corn. The obtained fine fraction is used in agriculture for animal feed, used in production lines
Ukraine, L'vivs'ka Oblast'
1 UAH
sale
Chaff-cutter IN 16/08 - is a necessary addition to the production lines for pellets and briquettes. Chaff-cutter is designed for chipping all types of dry straw (cereals, legumes, rape), Packed in bales of
Ukraine, L'vivs'ka Oblast'
1 UAH
sale
The main purpose of wood crusher machine DM 42/46; grinding substandard lumpy wood waste and logging, resulting in the production of lumber and plywood, as well as pieces of bark, on the fuel chips. The resulting
Ukraine, L'vivs'ka Oblast'
1 UAH
sale
Hydraulic press PBG 350/080 - designed for the manufacture of fuel briquettes from waste wood – from pre-shredded dry chips and sawdust are a fraction of 1-5 mm, which do not contain a sticky, viscous and
Ukraine, L'vivs'ka Oblast'
1 UAH
sale
Press screw IN 03/10 - intended for the manufacture of fuel briquettes from waste (sawdust , straw) which do not contain adhesive , viscous and fibrous impurities and also solid contaminants and free of
Ukraine, L'vivs'ka Oblast'
15 000 UAH
sale
The wood chipper is used to grind branches with a thickness up to 7 cm. the cone crusher can be used for crushing of garden branches that remained after the cleaning of the garden, and, specifically, for
Ukraine, Sums'ka Oblast', Sumy

3
http://img.bizator.com/a/2005579937/p3/1-copying-machine-pantograph-for-4d-carving-cnc.jpeg|http://img.bizator.com/a/2005579937/p3/2-copying-machine-pantograph-for-4d-carving-cnc.jpeg|http://img.bizator.com/a/2005579937/p3/3-copying-machine-pantograph-for-4d-carving-cnc.jpeg
3 300 $
sale
The company "UKRWOOD offers you to buy a copy and multi-spindle CNC machine for 4D and 3D carving, which will increase the productivity and competitiveness of your joinery or furniture enterprises. Our 3D
Ukraine, Vinnytsia Oblast', Vinnytsya
145 UAH
sale
Saws Proxxon (Germany) for jigsaws machines JET JSS-16, Scheppach Deco Flex, Proxxon DSH, Woodstar SD 16, Utool USS-16 and other models jigsaws Article 28745 (with transverse pins at both ends, a set of
Ukraine, Zaporiz'ka Oblast', Zaporizhia
145 UAH
sale
Saws Proxxon (Germany) for jigsaws machines JET JSS-16, Scheppach Deco Flex, Proxxon DSH, Woodstar SD 16, Utool USS-16 and other models jigsaws Article 28741 (with transverse pins at both ends, a set of
Ukraine, Zaporiz'ka Oblast', Zaporizhia
What is a cookie?
A cookie is a small text file which is stored on your computer/mobile device when you visit a website. This text file can store information, which can be read by the website if you visit it again later on. Some cookies are necessary so that the website can operate correctly. Other cookies are beneficial for the visitor. Cookies mean that you do not have to enter the same information every time when you re-visit a website.
Why do we use cookies?
We use cookies to offer you optimal access to our website. By using cookies, we can ensure that the same information is not displayed to you every time when you re-visit the website. Cookies can also help to optimise the performance of a website. They make it easier to view our website.
Corresponding organisational and technical measures are used to protect your personal data and prevent a loss of information or unlawful conduct.
Why do we use cookies from third-party providers?
We use cookies from third-party providers to be able to assess statistical information in collective forms using analytical tools, such as Google Analytics. Both permanent as well as temporary cookies are used for this purpose. Permanent cookies will be stored on your computer or mobile device for a maximum period of 24 months.
How can I deactivate cookies?
You can simply adjust your browser settings to switch off all cookies. Simply click on "Help" and search for "Block cookies". Please note: If you deactivate your cookies, the website may only be partially displayed or not displayed at all.
Up