Zzbo compact-30 mobile concrete plant
Offer type: sellPublished: 02.12.2016
| Price: | 43 212 $ |
| Company: | 100149 |
| Seller: |  22832 |
| Phones: |  +73519001127 Show phone |
| Address: | Russian Federation, Chelyabinsk, Zlatoust |
Special features
capacity 30 cu m per hour
no foundation or skip pit needed
twin-shaft concrete mixer
automatic control system - "single button" principle
transportation 1 euro trailer or 40 foot container
quick deployment and start-up - within one working day
Price given on EXW basis
technical features
capacity, cu m per hour 20... 30
automatic operation mode
twin-shaft concrete mixer bp-2g-750s
hoppers (number of x capacity, cu m) 2 x 12 = 24 (optional 4 x 6)
silo capacity (optional), tons from 22
camozzi pneumatic equipment (italy) camozzi
abac pole position l20p compressor (italy) abac
design summer
load of inert materials into the concrete mixer skip
total power, kw 38. 6
sector gate, pneumatic control
weight, kg 8,800
height, mm 7,300
width, mm 3,630
length, mm 11,710
the plant operates in automatic mode in accordance with the single button principle.
The operator needs to choose grade of concrete (m50…m500) and its amount for loading, and to press the button to start the cycle.
Pa 2. 0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows.
The compartment is built-in the main frame. All equipment is installed on a reinforced mounting frame which is placed on a level ground.
No foundation or skip pit needed. Bp-2g-750s twin-shaft concrete mixer is mounted on a platform.
Discharge height - 4 m. The concrete mixer is fitted with a skip for mixture hoisting and feeding.
For storage and dispensing inert materials dkm-24 batching complex is used. There are two hoppers of 12 cu m each.
Total capacity is 24 cu m. Optionally there may be installed a border in each hopper - so there will be 4 hoppers 6 cu m each.
A dispensing conveyor belt where component batching is performed is installed under the hoppers.
Components are fed from the hoppers by opening of camozzi pneumatically operated gates (italy).
Upon achievement of the required batch of inert materials, the conveyor is turned on, and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is fed by a screw conveyor into cement dispenser with maximum dosage 300 kg, after batching it's loaded into the concrete mixer.
Water is batched in water dispenser with mzximum dosage 150 litres. Also chemical additives dispenser with 20 litres dosage is included in basic configuration.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture, camozzi pneumatically operated gate is opened,
and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 55-60 seconds during which 0. 5 cu m of ready-to-use concrete is produced.
capacity 30 cu m per hour
no foundation or skip pit needed
twin-shaft concrete mixer
automatic control system - "single button" principle
transportation 1 euro trailer or 40 foot container
quick deployment and start-up - within one working day
Price given on EXW basis
technical features
capacity, cu m per hour 20... 30
automatic operation mode
twin-shaft concrete mixer bp-2g-750s
hoppers (number of x capacity, cu m) 2 x 12 = 24 (optional 4 x 6)
silo capacity (optional), tons from 22
camozzi pneumatic equipment (italy) camozzi
abac pole position l20p compressor (italy) abac
design summer
load of inert materials into the concrete mixer skip
total power, kw 38. 6
sector gate, pneumatic control
weight, kg 8,800
height, mm 7,300
width, mm 3,630
length, mm 11,710
the plant operates in automatic mode in accordance with the single button principle.
The operator needs to choose grade of concrete (m50…m500) and its amount for loading, and to press the button to start the cycle.
Pa 2. 0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows.
The compartment is built-in the main frame. All equipment is installed on a reinforced mounting frame which is placed on a level ground.
No foundation or skip pit needed. Bp-2g-750s twin-shaft concrete mixer is mounted on a platform.
Discharge height - 4 m. The concrete mixer is fitted with a skip for mixture hoisting and feeding.
For storage and dispensing inert materials dkm-24 batching complex is used. There are two hoppers of 12 cu m each.
Total capacity is 24 cu m. Optionally there may be installed a border in each hopper - so there will be 4 hoppers 6 cu m each.
A dispensing conveyor belt where component batching is performed is installed under the hoppers.
Components are fed from the hoppers by opening of camozzi pneumatically operated gates (italy).
Upon achievement of the required batch of inert materials, the conveyor is turned on, and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is fed by a screw conveyor into cement dispenser with maximum dosage 300 kg, after batching it's loaded into the concrete mixer.
Water is batched in water dispenser with mzximum dosage 150 litres. Also chemical additives dispenser with 20 litres dosage is included in basic configuration.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture, camozzi pneumatically operated gate is opened,
and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 55-60 seconds during which 0. 5 cu m of ready-to-use concrete is produced.
