OPTIMER ICG-3, SCR-3
| Price: | negotiated |
| Company: | ASMA-PRIBOR |
| Seller: |  Evgenij Aleksandrovich |
| Phones: |  (05236)7-15-00 Show phone |
| Address: | Ukraine, Kirovohrads'ka Oblast', Svitlovods'k |
Dealing with realization, repair, modernization and service maintenance of horizontal and vertical calipers.
GORIZONTALNYJ OPTIMER ICG-3
designed for contact measurements of external and internal linear size of products by comparison with end measures 4 and 5 ranks (1 and 2nd classes) the gauges or parts of the samples. In particular, the device can to measure plane-parallel end measures of length, caliber, the diameters of the balls, inner diameter, etc.
OPTIMER works fine in a room with temperature of 20±2°C and a relative humidity of 80%.
MAIN TECHNICAL FEATURES
Limits measurements length:
exterior . . . . . 0-500 mm
internal:
using tool with arcs:
lengths . . . . 13,5—400 mm
diameters . . . . 13.5 to 150 mm
with the help of electrical heads . 1-13,5 mm
Limits measure on a scale . . . ±0,1 mm
Lowest price the division of the scale . . 0,001 mm
The greatest mass of the measured product . 10 kg
Error of the measuring devices on any part of the scale:
from 0 to ±0,06 mm . . . . ±0,0002 mm
more than ±0,06 mm . . . ±0,0003 mm
The limit of permissible basic error during measurement: plane-parallel end measures . ± (0.4 + 5· 10-3∙ L) µm
the internal dimensions of the steel products . ± (1 +5 · 10-3 · L) µm,
where L is the measured length in millimeters.
Overall dimensions of the device . 1150×460×520 mm
Mass . . . . 126 kg
