Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  ventilation systems and equipment

Air VP-O.

Offer type: salePublished: 28.11.2017
Price:negotiated
Company:OOO Energobiokomplekt
Seller:Roman Aleksandrovich
Phones:
Show phone
Write a message
Address:Ukraine

The design of modern boilers, especially those in the cycles which is burning wet fuel, involve the use of air heater. The procedure of heating the air required for rapid ignition of the fuel materials and enhance the process combustion, which reduces heat loss by incomplete processing chemical and mechanical substances. The heater reduces the temperature of the output gases, which have a positive impact on the process of pre-heating feed liquid, which is supplied to the a water heat exchanger.


The appointment of the tubular air heater boiler pre-heating which is supplied to the the furnace of the air used for burning fuel. Final temperature when heating is from +150°to+250°C, which is achieved by the flue gas, gives off heat. The use of structures helps to increase the efficiency of boilers due to the drop in temperature of output gases and makes the combustion more intense.

Tubular device for air heating is the heat exchangers of gas and air. Output output gases move inside the tubes heated for the blast the air is housed and moves in the space between the pipes. Is the design of the tube bundles fitted with baffles, tube boards, prisoners in the wrapping frame, the top is paneling. In set also includes a bypass duct and gas and air.
Introduction to the work of the air preheater of the boiler provides a number of advantages:

  • increasing the temperature in the furnace;
  • increasing the heat transfer coefficient.
Process the burning becomes more intense, the increase in furnace temperature leads to a reduction in the period required for warm-up and ignition fuel. Intensification allows to reduce the coefficient of excess air no damage. There is an acceleration of oxidative processes. The heater reduces the temperature of the output gases reducing heat loss. Due to the more complete combustion of fuel particles reduced loss from incomplete combustion and the incomplete combustion. Against the background of reduction gas volumes are reduced energy costs for air-blasting design.