Boss beveled Mg,5 25mm pH 12X18H10T
Offer type: salePublished: 28.11.2013
| Seller: |  Sivkin Dmitrij |
| Phones: |  (8352)641723 Show phone |
| Address: | Russian Federation, Chuvashia, Cheboksary |
Is similar to BS-MH,5, manufactured according to TU 36-1097-85. Upon customer's request it is possible design changes: change material, thread, long, wall thickness, as well as perhaps a groove under the washer. It is recommended to choose the material of the lugs corresponding to the material of the pipe on which it is installed.
Lugs are designed for the installation of the immersion thermocouples for temperature measurement, instruments for measuring pressure, as well as for selected devices and shut-off valves, impulse lines used in the automation systems of technological processes in industry.
Boss used to connect to technological networks with a nominal working pressure PN 2.5 MPa according to GOST 356 and temperatures up to 300Cº
The boss is made of carbon steel 20 and stainless steel. Attach the lugs to the pipeline by welding.
Additional features:
Inner thread MH,5
The length of the internal thread (mm) 25
The diameter of the hole sensor (mm) f
Dimensions FH
Material ST20
Lugs are designed for the installation of the immersion thermocouples for temperature measurement, instruments for measuring pressure, as well as for selected devices and shut-off valves, impulse lines used in the automation systems of technological processes in industry.
Boss used to connect to technological networks with a nominal working pressure PN 2.5 MPa according to GOST 356 and temperatures up to 300Cº
The boss is made of carbon steel 20 and stainless steel. Attach the lugs to the pipeline by welding.
Additional features:
Inner thread MH,5
The length of the internal thread (mm) 25
The diameter of the hole sensor (mm) f
Dimensions FH
Material ST20
