Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  welding equipment

Welding machine mig 250 Hero( mma)

Offer type: salePublished: 12.10.2015
Show phone
Show phone
Write a message
Address:Ukraine, Kharkivs'ka Oblast'
When purchase via our website there is a cumulative system of discounts for regular customers. For this product FREE shipping!

To buy the goods, You can go to our shop here:

The Hero MMA welding machine/MIG-250 inverter+ electrode welding
Welding machine mig 250 Hero(+mma) is a semi - professional a technique used to cut, weld and welding elements, structures and components from ferrous and nonferrous metal. While welding with it can be done in shielding gas and without gas, by means cored or flux-cored wires. Features and benefits of this model are its high quality and precision welds, and the ability to withstand high working loads. In its structure includes several systems of protection against overheating or overloads in the network.

Welding machine mig 250 Hero(+mma) is working with wire, with a diameter of 0.6 to 1.0 mm, and the electrodes, with a diameter from 1.6 to 5.0 mm. Used when working with stainless steel electrodes, and the electrodes, used for welding of especially complicated and important structures. Management feedback gives him the opportunity to work on weak networks with swings plus and minus 15% from the basic indicator. Welding voltage and welding current in it is regulated smoothly. In management there is a switch for the choice of working with wire of different diameter. The model of this inverter small by mass and size and this facilitates its transportation to the place of work. It is suitable both for repair and installation in country houses, or garages, and for small and medium size operations, station technical service, workshop, smithy.

Supply voltage, V 220
The mains frequency Hz 50/60
Adjustment range of operating voltage, 16-27
Rated operating mode (PV) at cycle 10 min., % 60
The smallest welding current, a 40
Most welding current, a 250
The diameter of the wire (electrode) of 0.6-1.0
The diameter of the electrode at MMA 1,6-5,0
The number of pairs of feed rollers 1
Maximum consumed power, kW 6,7
Efficiency, % 85
Overall dimensions, mm Hg
The presence of MMA there
Weight,kg 16

Package contents:
-Welding sleeve
Cable with electrode holder
-The ground cable
-Shield welding

- Semi-automatic welding in MIG/MAG mode;
Arc welding covered electrode direct current (MMA);
- Overload protection;
- Active cooling;
- Low power consumption;
- Stable work on weak networks.
- Adjust operating voltage;
- Adjust the wire feed speed;

12 month warranty.