Hydraulic press PB
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Designed to perform wide range of operations: pressing-removing, firmware, calibration, editing, sheet metal forming without deep drawing.
The press can be used for both production and repair units and workshops. The press has the ability to integrate into automated lines and complexes.
Custom presses can be equipped with the correct table and snap.
Specifications:
Press power nominal, 100 kN
The stroke of the RAM, 400 mm
Maximum distance between table and slider, mm 600
Table size, mm
from left to right 500
from front to back 380
The distance from the axis of the rod to the base, 200 mm
The speed of the slide, mm/s
at idle 240
when working stroke 25 100...
during the return 360
The type of control system electric
Drive power, kW 4
Overall dimensions (without the right of the table), mm
from left to right 910
from front to back 1450
height 2270
Mass media, 1170 kg
The press can be used for both production and repair units and workshops. The press has the ability to integrate into automated lines and complexes.
Custom presses can be equipped with the correct table and snap.
Specifications:
Press power nominal, 100 kN
The stroke of the RAM, 400 mm
Maximum distance between table and slider, mm 600
Table size, mm
from left to right 500
from front to back 380
The distance from the axis of the rod to the base, 200 mm
The speed of the slide, mm/s
at idle 240
when working stroke 25 100...
during the return 360
The type of control system electric
Drive power, kW 4
Overall dimensions (without the right of the table), mm
from left to right 910
from front to back 1450
height 2270
Mass media, 1170 kg
