Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

The lathe, screw-cutting MN-1

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Phones:
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
On a lathe MN-1 can be produced external turning, boring, drilling, processing cones, thread cutting: metric modular, inch, pitteway.
Technical characteristics and rigidity of the lathe MN-1 allows you to fully use the possibilities of HSS and carbide tools when machining ferrous and non-ferrous metals.
Specifications:
* The largest diameter of the workpiece, mm
* installed over bed 700
* processed over bed 630
* processed over 350 caliper
* installed above the notch the frame 900
* Max. length of workpiece, mm 1500
* The length of the notches in the frame from the flange end of the spindle, 450 mm
* The diameter of the cylindrical hole in the spindle, mm 105
* The size of the front end of the spindle headstock according to DIN 11M
* The number of degrees of rotation of the spindle 22
* The diameter of the cylindrical hole in the spindle, mm 105
* The rotational speed of the spindle, rpm 10-1250
* The limits of working feeds, mm/Rev.:
* longitudinal 0,033-5,6
* cross-0,013-2,064
* slide 0,010-1,76
* Within steps thead:
* metric, mm 1-224
* inch threads per inch (28-0,25
* modular, module 0,25-56
* Pitkevich, pitch dia. 112-0,5
* Accelerated movement of the caliper, mm/min:
* longitudinal 5,2
* cross 2
* The greatest weight of workpiece (kg) 3500
* Main drive power, kW 15
* Overall dimensions, mm
* length 3750
* width 1780
* 1,550
* Weight, kg 4840