Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

Radial drilling machine L

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
Drilling machine L is designed to handle holes in medium and large parts. On the machine, you can perform the following operations: drilling, sekeramayi, reaming, facing, and threading.
Drilling machine L used in job shop and batch production.
Most conventional drilling capacity (in steel grade 45 GOST 1050-74), 32 mm
The departure of the spindle from forming columns, mm
least 290
the highest 1000
Maximum distance from spindle nose to plate 1120 mm
distance from spindle nose to table mm
least 15
the greatest 630
The diameter of the column, 250 mm
The greatest angle of rotation around the column, hail 330
The clamp on the column manual
The greatest move in the guide sleeve, mm 710
The clamp on the guide sleeve manual
Spindle stroke, mm
1 turn the limb 94,2
the greatest 325
The width of the base plate, mm 800
The width of the groove plate according to GOST 1574-75, 22 mm
The distance between the grooves according to GOST 6569-75, 160 mm
The number of grooves 3
The number of steps of spindle speed 8
The range of spindle rpm 35,5 1400...
The number of stages of the mechanical feed of the spindle 6
The limits of the feed spindle, mm/Rev 0,1 1,1...
The most effective power to the spindle, kW 1,6
The greatest torque on the spindle, kgf/m 18
Most feed force, kgf 800
Overall dimensions, mm
length 1850
width 800
height 2430
Machine weight, kg 2100