Hammer pneumatic forging MA
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Hammer forging pneumatic MA designed for various forging, drawing, upsetting, firmware holes, hot cutting of metal by free forging flat and shaped the strikers.
Specifications:
The nominal weight of falling parts (kg) 400
The number of beats per minute brisk 142
The effective kinetic energy of the falling parts at impact (at least), kgf/m 1100
The distance from the axis of the slide to the frame, mm 530
Mirror size Boykov, mm
length 250
width 90
The height of the bottom mirror striker above the floor level, mm 750
The diameter of the working cylinder, 480 mm
The diameter of the cylinder of the compressor, 480 mm
The piston stroke of the compressor, 390 mm
The progress of women (most), 640 mm
Optimal Prokofyeva blank section, mm
square by 100
round - diameter 115
Overall dimensions, mm
from left to right 3020
from front to back 1320
height above floor level 2700
Weight, kg with striker plate 13000
Specifications:
The nominal weight of falling parts (kg) 400
The number of beats per minute brisk 142
The effective kinetic energy of the falling parts at impact (at least), kgf/m 1100
The distance from the axis of the slide to the frame, mm 530
Mirror size Boykov, mm
length 250
width 90
The height of the bottom mirror striker above the floor level, mm 750
The diameter of the working cylinder, 480 mm
The diameter of the cylinder of the compressor, 480 mm
The piston stroke of the compressor, 390 mm
The progress of women (most), 640 mm
Optimal Prokofyeva blank section, mm
square by 100
round - diameter 115
Overall dimensions, mm
from left to right 3020
from front to back 1320
height above floor level 2700
Weight, kg with striker plate 13000
