Guillotine shears N
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
The alligator shears are designed for cutting long metal waste and scrap in a cold state. Demolition shears can be used at the enterprises of "Vtorchermet", "recycling non-ferrous metals", in all industries, factories, commercial and small-scale production.
Specifications:
Nominal cutting force on the inner end of the knife, 1600 kN
The maximum dimensions of cross section of the metal being cut, mm
circle (diameter) 70
band (width, thickness) 600 x 10
Frequency continuous strokes of the knife, min-1
least 15
most 45
The cycle time segments of the greatest cross-sections, with no more than 6
Length of knives, mm
the main 630
an additional 250
Zev scissors, 60-240 mm
The cycle time cutting cross-sections, with no more than 6
Power consumption, kW 22
The dimensions of the scissors, mm
length 4540
width 1220
Height above floor level, mm 1900
Shears weight, kg 5800
Specifications:
Nominal cutting force on the inner end of the knife, 1600 kN
The maximum dimensions of cross section of the metal being cut, mm
circle (diameter) 70
band (width, thickness) 600 x 10
Frequency continuous strokes of the knife, min-1
least 15
most 45
The cycle time segments of the greatest cross-sections, with no more than 6
Length of knives, mm
the main 630
an additional 250
Zev scissors, 60-240 mm
The cycle time cutting cross-sections, with no more than 6
Power consumption, kW 22
The dimensions of the scissors, mm
length 4540
width 1220
Height above floor level, mm 1900
Shears weight, kg 5800
