Guillotine shears NA
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Guillotine guillotines are designed for longitudinal and transverse cutting of sheet material. Used in harvesting the shops of machine-building enterprises.
Guillotine guillotine is made with the top drive. For dimensional strip cutting shears equipped with a rear focus, which is installed from the back side of knife beam. The sheet when cutting gelatinous pressed presser beam, working in unison with the cutter beam. A necessary condition of the clamp provide springs which are placed in the cups of the clamping beams. The circuit provides guillotine shears guillotine on single and auto moves. Management guillotine shears guillotine push button and pedal. Lubrication of the main mechanisms combined.
Specifications:
The largest dimensions of the cut sheet, mm, GB=500 MP, mm, not more
- maximum of 12.5
- minimum of 1.5
- width 2000
The distance from the edge of the stationary blade to the frame (departure), 500 mm
The frequency of the strokes of the knife, in 40 min
The tilt angle of the rolling knife 2 gr. 10 minutes
The width of the strips cut along the back fence, 500 mm
The number of cutting edges of the knife 4
The distance between the posts in the light, 2235 mm
The maximum cutting force, kN 500
Installed power, kW 17
The dimensions of the scissors without attached equipment, mm
- front to back 2500
from left to right 3390
- height 2345
Lots of scissors without attached equipment, 8650 kg
Guillotine guillotine is made with the top drive. For dimensional strip cutting shears equipped with a rear focus, which is installed from the back side of knife beam. The sheet when cutting gelatinous pressed presser beam, working in unison with the cutter beam. A necessary condition of the clamp provide springs which are placed in the cups of the clamping beams. The circuit provides guillotine shears guillotine on single and auto moves. Management guillotine shears guillotine push button and pedal. Lubrication of the main mechanisms combined.
Specifications:
The largest dimensions of the cut sheet, mm, GB=500 MP, mm, not more
- maximum of 12.5
- minimum of 1.5
- width 2000
The distance from the edge of the stationary blade to the frame (departure), 500 mm
The frequency of the strokes of the knife, in 40 min
The tilt angle of the rolling knife 2 gr. 10 minutes
The width of the strips cut along the back fence, 500 mm
The number of cutting edges of the knife 4
The distance between the posts in the light, 2235 mm
The maximum cutting force, kN 500
Installed power, kW 17
The dimensions of the scissors without attached equipment, mm
- front to back 2500
from left to right 3390
- height 2345
Lots of scissors without attached equipment, 8650 kg
