Guillotine shears NDG
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
The alligator shears are designed for cutting long metal waste and scrap in a cold state. Demolition shears can be used at the enterprises of "Vtorchermet", "recycling non-ferrous metals", in all industries, factories, commercial and small-scale production.
The cutting machine, designed for pipes.
Specifications:
The thickness of the metal with the ultimate strength of 500 MPa (50 kgf/mm^2), mm 2.5
The width of the metal, 1600 mm
The maximum width of the cut strip at the rear focusing, 600 mm
Permissible cutting force, kgf 3400
The frequency of moves of a knife in minutes
- idle 65
- when cutting metal 34
The dimensions of the scissors in the plan, mm
- from left to right 2340
- front to back (without lateral position) 2020
- the height of the scissors 1320
Shears weight, kg 2020
The cutting machine, designed for pipes.
Specifications:
The thickness of the metal with the ultimate strength of 500 MPa (50 kgf/mm^2), mm 2.5
The width of the metal, 1600 mm
The maximum width of the cut strip at the rear focusing, 600 mm
Permissible cutting force, kgf 3400
The frequency of moves of a knife in minutes
- idle 65
- when cutting metal 34
The dimensions of the scissors in the plan, mm
- from left to right 2340
- front to back (without lateral position) 2020
- the height of the scissors 1320
Shears weight, kg 2020
