Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

Guillotine shears N

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
Shears are designed for cutting and slitting sheet material. Used in harvesting the shops of machine-building enterprises.
Shears are made with top drive. For dimensional strip cutting guillotine shears equipped with a rear focus, which is installed from the back side of knife beam. The sheet when cutting guillotine presses the presser beam, working in unison with the cutter beam. A necessary condition of the clamp provide springs which are placed in the cups of the clamping beams. The circuit provides the scissors on single and auto moves. Management guillotine shears button and pedal. Lubrication of the main mechanisms combined.
The greatest thickness of the cut sheet when Gвр=50 kgf/mm kV 6,3 mm
The maximum width of the cut sheet, mm 2000
The distance from the edge of natvig.knife to the bed (departure), 500 mm
The number of strokes of the knife in 55 min
The tilt angle of the rolling knife, grad. Grad 30min
The width of the cut piece on the greatest emphasis, 900 mm
The stroke of a knife, mm 80
The number of cutting edges of the knife, 4 PCs
The distance between the posts in the light, mm 2410
Nominal effort of cutting, kg 20000
The dimensions of the scissors, mm
From left to right 3160
From front to back 1930
Height above floor level, mm 2175
Shears weight, kg 5100