Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

Press the crank CE

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
Crank press with pneumatos CE mechanical is designed for use in almost all branches of promyshlennosti. The press can be equipped with devices for automatic forming roll tape, strip and piece blanks.
Design features of the crank press with pneumatos CE :
- adjustable stroke of the RAM;
- centralized lubrication system;
- safety devices force (in the slide) and torque (clutch-brake);
- rigidly interlocked with the clutch-brake;
- lock braking angle.
The circuit provides the following modes of operation: adjustment (inching mode), single moves, automatic and manual rotation of the flywheel..
The greatest effort press, vol 100
Move the slider adjustable, mm
the smallest 10
most 130
Frequency continuous moves, min-1 100
Maximum distance between table and slide in its lower position with the greatest progress, 400 mm
The distance adjustment between table and slider, mm 100
Table size, mm
from left to right 950
from front to back 630
The dimensions of the slide, mm h
The distance from the axis of the slide to the frame (departure), 340 mm
The distance between the posts of the bed in the light, 400 mm
The thickness of the punch plate, 100 mm
Electric motor power, kW 10
The path of the nominal efforts to NMT, 5 mm
Overall dimensions, mm
from left to right 1745
from front to back 2360
height 3180
Mass media, kg 9015