Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

Press the crank CDC

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
Crank press with pneumatos CDC, designed to perform various operations of cold punching sheet metal.
The bed of the Crank press with pneumatos CDC iron or steel, box-like shape. In bearings mounted eccentric shaft. The front frame on the guides set the slider, which is the working body of the press. The slider is connected with the eccentric shaft by means of an adjusting screw and detachable rod. On the work plane table fixed punch plate with T-slots and hole for "failure". To protect the press from overload as a safety washer that when the overload is destroyed.
The nominal press force kN 630
The stroke of the slide, mm
the smallest 10
100 greatest
The number of moves the slider in min-1 h
Table size
front-560 ago
from left to right 800
The distance from the axis of the slide to the frame (departure), 300 mm
Maximum distance between table and slider in its lower position with the greatest progress, 340 mm
The distance in light between the posts of the bed, 340 mm
Overall dimensions, mm
front to back 1680
from left to right 1530
height 3000
Weight, kg 6275