Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  industrial equipment

Press the crank CDC

Offer type: salePublished: 17.10.2014
Seller:Zajtsev Yurij Aleksandrovich
Show phone
Show phone
Write a message
Address:Russian Federation, Tverskaya Oblast'
Crank press with pneumatos CDC is press one crank outdoor simple steps a force of 250 kN. Designed to perform various operations of cold punching sheet metal.
The bed of the crank press with pneumatos CDC iron or steel, box-like shape. In bearings mounted eccentric shaft. The front frame on the guides set the slider, which is the working body of the press. The slider is connected with the eccentric shaft by means of an adjusting screw and detachable rod. On the work plane table fixed punch plate with T-slots and hole for "failure". To protect the press from overload as a safety washer that when the overload is destroyed.
The nominal press force kN 250
Move the slider adjustable, mm
the greatest 80
least 5
The frequency of the strokes of the RAM in a minute
continuous unregulated 180
single 56
Table size, mm
length 500
width 340
The diameter of the hole in the table 210 mm
The distance from the axis of the slide to the base, 190 mm
Maximum distance between table and slider in its lower position with the greatest progress, 250 mm
Table height over floor level, mm 835
The dimensions of the press, mm
length 1180
width 1140
height 2295
Mass media, kg 1970