The sensor control of the torch "Flame - МО2"
Offer type: salePublished: 18.09.2017
| Seller: |  Vladimirovich Yurij |
| Phones: |  +380505487063 Show phone |
| Address: | Ukraine, Kyiv Oblast', Irpin |
Application
Designed for automatic protection of gas turbines and teploagregat from the effects of spontaneous extinction of the flame. Product identification Flame-M in the project specifications: "control Device flame-M ТУ25-02.020313-89" Flame-М02-protection units installed on a truck chassis, with a number of channels-1.
Technical data
Voltage Flame-М02 24 VDC
Power consumption, W, not more
Flame-М02 (12 In) of 2.5
Flame-М02 (24 In) 5,0
The inertia of the trigger, with no more than 2 (ukrboard copy, 176;119;10;204, 17;09)
Length of connection line PP and FD, m, not more than 300
Illumination FD, BOS, 2000
Operating conditions, °C PP-2 from -10 to +50
FD -50 to +50
Output parameters of PP-2, switching group relays, 10 VA
Guidance for design, installation and commissioning
In the project include:
Free access of personnel to hardware, including connectors, loose passages, and spacious working places of operators. The installation of photoelectric flame sensor, FEP (FD) in place that ensure flame control. Electric installation is carried out according to the above connection diagrams. The cable that connects the converters of PP with other devices must be rated for voltage and load matching characteristics of the device.
Designed for automatic protection of gas turbines and teploagregat from the effects of spontaneous extinction of the flame. Product identification Flame-M in the project specifications: "control Device flame-M ТУ25-02.020313-89" Flame-М02-protection units installed on a truck chassis, with a number of channels-1.
Technical data
Voltage Flame-М02 24 VDC
Power consumption, W, not more
Flame-М02 (12 In) of 2.5
Flame-М02 (24 In) 5,0
The inertia of the trigger, with no more than 2 (ukrboard copy, 176;119;10;204, 17;09)
Length of connection line PP and FD, m, not more than 300
Illumination FD, BOS, 2000
Operating conditions, °C PP-2 from -10 to +50
FD -50 to +50
Output parameters of PP-2, switching group relays, 10 VA
Guidance for design, installation and commissioning
In the project include:
Free access of personnel to hardware, including connectors, loose passages, and spacious working places of operators. The installation of photoelectric flame sensor, FEP (FD) in place that ensure flame control. Electric installation is carried out according to the above connection diagrams. The cable that connects the converters of PP with other devices must be rated for voltage and load matching characteristics of the device.
