The Durometer ( hardness ) shore model A, scale 0-100
| Price: | 1 950 UAH |
| Company: | OOO 'MED-PROM RESURS' |
| Seller: |  Stibletsov Stanislav Gennadievich |
| Phones: |  095-6387441 Show phone |
| Address: | Ukraine |
Hardness is a measurement tool designed to measure
hardness values flowable materials in units of Shor's method
indentation.
Hardness (Durometer)
the model is designed to measure the hardness on a scale of a shore type a rubber
according to GOST 263-75, soft plastics according to GOST
24621-91 (ISO 868-85), including soft polyurethanes: elastomer, PVC,
silicone products from natural rubber, neoprene, resin,
polyester, leather, printing rolls, etc. in accordance with
standards GOST R ISO 7619-1-2009; DIN EN ISO 868, DIN 53505, ASTM D
2240, ISO 7619, NFT 51-174, BS903 Part. A 26.
1. Operating range for measuring the hardness on a scale of a shore type a: 0-100 HA
2. Accuracy: ±2
3. The investigated samples: rubber, synthetic rubber, vulcanized rubber, soft rubber, leather, wax
4. The thickness of the test material not less than 6 mm
6.The minimum distance between:
· Adjacent measurement points (prints) - 6 mm
· Adjacent points of measurement for porous materials - 15 mm
· The center measuring point and the edge of the surface of the product 12 mm
7. The minimum required diameter of the prepared surface for measurements - 10 mm
8. Resource indenter – hardened steel rod Ø1,3 mm (minimum dimensions) - 100.000
9. The departure of the indenter from ground zero the instrument indication - 2.5±0.01 mm
10. Preliminary and ultimate load: 0,55 ... 8,05 ON
11. Force/mass loading: 12.5 N
12. Dimensions: 77*54*22 mm
13. Weight: 130 g
Package contents:
1. Digital hardness tester (Durometer) shore type a
2. Plastic case
3. Manual in English.
