Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  wood-working machines

Firewood processor-screw(cone screw chopper-kit Assembly -1980 UAH

Offer type: salePublished: 18.09.2014
Seller:Brodovskij Aleksandr
Show phone
Write a message
Address:Ukraine, Kyiv Oblast', Bila Tserkva
All the details for the firewood processor is made of tool steel. The best option for the firewood processor is used to reduce speed and increase torque can lower the belt drive consisting of 2 belts, working together, because one belt will slip on the pulley. The optimal speed for robots cone screw 600-750 rpm engine Power at a 2-or 3-phase incorporating about 3kW-4kW., 1000...1500 Rev/min the Principle of operation of the firewood processor is very simple. Rotating the cone with thread screwed into a block of wood and splits it. Firewood processor for harvesting of firewood for the winter set next to the woodpile. In this case, the wood immediately placed under a shed and now it is not necessary on several occasions to bow down behind the log, as it had to do with splitting wood in the traditional way, namely, the axe.. Ways of drives: 1) When connecting the nozzle through a belt drive to electrodiathermy need the motor 3-4 kW (220V/380V) 3) When fixing the nozzle through a pressure reducing gasoline engine of 6.5 l/s
More detailed information you can get by phone (098)77-521-77 or on the website:
In the package you send is:
1) Cone screw (assembled with 2 screws)-1 PCs
2) Body Assembly with the shaft -1 piece
3) key - 2 pieces
4) the small pulley -1 PCs
5) pulley large - 1 piece
6) belt V -2 PCs