Polymer self-leveling floor. The finish color layer
Offer type: salePublished: 03.09.2014
| Seller: |  Ognev Vasilij |
| Write a message | |
| Address: | Russian Federation, Irkutskaya Oblast', Irkutsk |
Polymer finish for filling the floor.
Two-component, self-razravnivaetsya epoxy floor, with a smooth glossy surface and specific requirements for flatness.
Polymer self-leveling floor, color. Does not require additional finishing layer.
The color is chosen according to the standard catalog RAL.
When ordering, give the room color!
The finishing of polymeric color coating for the floor. The floor surface is obtained perfectly smooth, flat and glossy.
The thickness of the floor of 1.5-2.0 mm.
The flow rate of 2.3 kg/m2 (consumption on the thickness of at least 2mm)
For the application to use the squeegee or notched trowel.
For expelling air and additional levelling to use a spiked roller
Two-component, self-razravnivaetsya epoxy floor, with a smooth glossy surface and specific requirements for flatness.
Polymer self-leveling floor, color. Does not require additional finishing layer.
The color is chosen according to the standard catalog RAL.
When ordering, give the room color!
The finishing of polymeric color coating for the floor. The floor surface is obtained perfectly smooth, flat and glossy.
The thickness of the floor of 1.5-2.0 mm.
The flow rate of 2.3 kg/m2 (consumption on the thickness of at least 2mm)
For the application to use the squeegee or notched trowel.
For expelling air and additional levelling to use a spiked roller
