Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  laboratory equipment

The gauge showing DM U2

Offer type: salePublished: 28.02.2015
Seller:Valentina Ivanovna
Show phone
Write a message
Address:Ukraine, Sums'ka Oblast', Sumy
Gauge DM is designed for measurement of gauge pressure of liquids, gases or steam. At the same time, should pay attention to the fact that the instrument gauge showing DM U2 can only be used with non-corrosive environments, as well as with the media, which do not cause crystallization on surfaces used in the device materials. The gauges DM-1001 U2 cannot be used to measure the pressure of oxygen; ammonia in liquid, gaseous state and its aqueous solution.
Devices in this series have accuracy class - 1.
Fabricated devices with diameter 100 mm, which provides good visibility of indications of the measured parameter. The outside dimensions of the device are 0...kA; 0...1 MPa; 0...1.6 MPa; 0...2.5 MPa.
To connect the device, use the fitting radial. The fitting is threaded M12x1,5.
The gauges in this series can be used in a wide temperature range. Operating temperature range is -50...+60 degrees Celsius. The devices have a resistance to vibration frequency up to 25 Hz and amplitude up to 0,1 mm weight of the device is 0.4...1.0 kg, depending on performance.

Devices in this series have been successfully used in various industries. They were well established in the chemical industry, mechanical engineering and other sectors of the economy. When all the requirements for operation, the devices of this series will last you a long time.
Case diameter mm : 100 mm

Accuracy class : 1

Working medium : liquid, gas

Measuring range: kA; 1; 1,6; 2,5 MPa
Fitting radial thread M12x1,5
Range of working temperatures, °C + 60 ... - 50
Resistant to vibration with a frequency of 25 Hz and an amplitude of 0.1 mm
Dimensions (diameter), mm: 100;
Weight kg 0,4; 1,0