Adhesion devices-the multiblade knife UCB EN-1

Adhesion devices compliant standards: GOST 15140, ISO 2409 ISO 16276-2, ISO 2409 DIN 53151, ASTM In 335, ASTM D 3002, BS 3900-E6, BS EN ISO 2409, NF T 30-038

Multiblade knife-adhesion devices designed to determine the adhesion method cuts (parallel or lattice) when the thickness of the coating to 200 microns. Multiblade knife-adhesion devices may be used not only flat, but also on curved surfaces.

Application:

To assess the adhesion it is necessary, with the help of adhesion devices, to penetrate the coating to the substrate. When need to turn the knife 90 degrees and repeat the operation, in the the coating formed from the bars or strips of the same step. The cut must be cleaned with a soft brush or Scotch tape. The adhesion is evaluated visually on a scoring system.

Main technical characteristics of the multiblade the adhesion devices-knife UCB EN-1

 

The number of cutters

3

The step between the working blades, mm

1, 2, 3

(other steps of the blades of the cutter - to-order

The number of working blades

6

The coating thickness, μm

60 step 1 mm;
60-120 step 2 mm;

120-200 step 3 mm

Points definition and evaluation of adhesion

 

1-4 (according to GOST 15140 lattice method cuts);
1-3 (according to GOST 15140 method parallel cuts);
0-5 (ISO 2409 ISO 16276-2, ASTM D3359 )

Overall dimensions, mm, not more than

HH

 

Main technical specifications multiblade adhesion devices-knife UCB EN-1M

The number of cutters

1

The step between the working blades, mm

1 or 2 or 3

(other steps of the blades of the cutter - to-order

The number of working blades

6

The coating thickness, μm

60 step 1 mm;
60-120 step 2 mm;
120-200 step 3 mm

Points definition and evaluation of adhesion

1-4 (according to GOST 15140 lattice method cuts);
1-3 (according to GOST 15140 method parallel cuts);

0-5 (according to ISO 2409 ISO 16276-2, ASTM D3359 )

Overall dimensions, mm, not more than

HH