Correct cutting machine

Machine for uncoiling, straightening and cutting machine, welded wire mesh Straighten the wire section through the cutting sleeve fixedly mounted in the housing of the feeder , served in a closed trough the paper tray until it stops, adjusted to the desired cut length of the rod, after which it is cut. The feed speed can be changed stepwise by using a multi-speed motor. In addition, the feed speed can be changed by using interchangeable pulleys , thus provide a large range of feed speed that allows you to link metal (wire) of different diameters with the best possible maximum speed. The rotational speed of the right frame, you can change speed gear shift motor on the drive. On the drive right frame of the machine for the production of electrodes applied shirokougolnyiy the direct current motor. The diameter of the valves 3-6mm The length of the wire of 1.2-6.0 m speed: 80-110m/min Materials: low carbon And The diameter Provolone-6mm Wire length:1,2-6,0 m Speed: 25-30m/min Materials: low carbon The diameter vipralambha and cut off rental The cut length of rental, adjustable The frequency of rotation is correct frame Power consumption of the motor Maximum speed edit Ordering information Unit: PCs Minimum order quantity: 1 piece Supply: 30 days Packing: Webshow machine should be wrapped with plastic to prevent moisture ,all parts are Packed in wooden boxes. Before packing all processed parts and components of the equipment must be protected with corrosion-resistant coating ,providing protection from damage and corrosion .