A pump for pumping and fueling (dispensing) of diesel fuel from the barrel or tank PTP 12V, 40 l/min
This is a simple and effective solution for filling and pumping in the field. Ideal for charging of agricultural and construction equipment, boats and motor boats. The pump has a built-in bypass valve, which "leads" the fuel when the pump and a closed fuel dispensing faucet.

Features: Pump: 12V
Current work: 21A
Class of protection against moisture: IP55
Capacity: 40 l/min
The cycle of continuous operation: 30 min
The outlet pressure max: 1.3 Bar
The height of the dry suction: 2 meters
Bypass valve: Yes
Inlet: ¾' BSP
Outlet: ¾' BSP
Built-in pump filter: no
Operating temperature range: -20C/+50C
The maximum viscosity of the fluid: diesel
Allowed fluids: diesel
Smoking liquid: gas, alcohol, water, gasoline, kerosene
Maximum noise level: 75 dB
Net weight: 7,7 kg
Gross weight: 8.6 kg

Included:
• self-priming vane pump with bypass valve
• cord with gear clamps - "crocodiles" - 2.5 m
• fuse 30A
• electric switch (pump casing)
• fuel delivery hose 4 meters with a diameter of 19 mm (¾') with the fittings necessary to connect to the gun
• aluminum fuel dispensing gun without clipper with built-in swivel coupling, female thread 1' BSP
• suction hose - metal telescopic tube with a coarse filter for the barrel 205 litres
• coarse filter (trumpet)

Instead of pipes can be installed visiually sleeve for use with containers of different type. After practical tests boldly declare that the pump pressurizes the fuel from a depth of 3 meters.
Category catalog Prom.ua: Equipment for filling stations, tank farms in Kiev