Boiler electric Warmos IV Evan 9,45

The electric boiler Evan Warmos IV of 9.45 is a stationary heating device intended for heating of residential, domestic, industrial, agricultural and other facilities. The device can be used in conjunction with other heating sources as primary or backup. According to the degree of protection against electric shock the appliance corresponds to the I class. The heater is supplied along with the insulation housing, the inlet and outlet and tubular heaters of stainless steel. A boiler equipped with a control panel with led indication. Bright indicators show power stage, the temperature of the coolant. If the boiler is run at a negative temperature is displayed with a specific value: "-0". The mode "boiler Control the temperature of the air in the room" is displayed on the display by the blinking dots. Provided for indication of emergency situations. Electric boiler Evan Warmos IV has a three stage power limitation in manual mode, and operates over the extended temperature range of the coolant from +5 to +85 OC. To maintain the desired temperature of the coolant provides automatic selection of the required number of levels of power. When an emergency situation occurs on the panel highlighted the codes that indicate if: there is a break of temperature sensor monitoring the temperature of the coolant (code E1); happened a short circuit of temperature sensor temperature control (E2); the heat carrier warmed up above +84 oC (E3); the coolant has warmed up above +90°C (FF). Additional safety circuit provides an independent emergency shutdown. The boiler is resistant to changes in the supply voltage and remains in operation as at reduced (to 180) and at elevated (up to 260 V) voltage. Electric boiler has all the advantages typical of other models of electric boilers EVAN: the ability to use water as a transfer medium and antifreeze, certified systems, option time delay on and off levels of power, reliable tubular heating elements of stainless steel production Backer with the rotation of them each time. The accuracy of the temperature settings is 1 OS. The choice of performance levels is automatic – the boiler itself determines the optimal number of steps. This preserves the possibility of manual regulation of power.