Bizator  /  Adverts  /  transport and traffic  /  motor-car industry  /  auto- spares  /  spares, accessories

Diesel Fuel Injector for Ford - China Nozzle Holder 27333

Offer type: sellPublished: 03.08.2018
Price:negotiated
Seller:Corissa Lao
Phones:
Show phone
Write a message
Address:China, Shenzhen

VE Diesel injection pump  Nj-Ve4/11e1600r015 for JMC

China Lutong Part Plant is specialist for Diesel Fuel Injection Parts, Especially Diesel Parts for VE Diesel injection pump, Such as Rotor Head, Diesel Nozzles, Plungers and Delivery valve etc Reference  components  in Fuel Injection Parts.
 
Also launched VE pumps for years, about VE pumps:
The purpose of the fuel injection pump is to deliver an exact metered amount of fuel, under high pressure, at the right time to the injector. The injector, unlike in a gasoline engine, injects the fuel directly into the cylinder or a prechamber connected to the cylinder.
The VE in the name of the Bosch pump used in the VW diesels and many other small diesel engines stands for "Verteiler", which is German for distributor or divider. The other common kind of injection pump is the inline pump. The difference between them is that the "Verteiler" VE pump has one fuel metering plunger, and a mechanism (the "Verteiler"/distributor) to send the fuel to the right cylider. The inline pump has one plunger for each cylinder.
 
Some other functions of the fuel injection pump are:
Timing-- The timing is adjusted in response to engine RPM. At higher RPM s, the fuel pressure from the vane transfer pump is higher. Pressure changes effects a spring loaded plunger, and the resulting movement will move the cam rollers to either advance or retard the timing. There is also a cold start device which advances the idle timing manually.
Governor-- A mechanical governor limits the maximum speed of the engine to 4800 rpm in the bus/vanagon application and 5350 rpm in newer passenger cars. It can be seen just above the cam disk in the middle figure.
Stop-- A magnet valve or solenoid (shown in the figures) opens and shuts off the fuel channel between the feed pump and the metering pump.
Aneroid-- An air inlet pressure sensor is used to determine maximum amount of fuel delivered on injection pumps for turbo engines. On newer ('89 and later) naturally aspirated engines a similar arrangement is used for altitude compensation.

Now the items for our VE pumps as following:
 
Any comments, please contact with me

ItemOEMLUTONG #LUTONG #Engine1NJ-VE4/11F1900LNJ03ADS-VE4/11F1900L0032000110003   JX493Q1
  GW4D282NJ-VE4/11F1250L009ADS-VE4/11F1250L0042000110004JX493Q1/PD20093NJ-VE4/12F1900LNJ01ADS-VE4/12F1900L00520001100054JB14 WF-VE4/11F1900L002ADS-VE4/11F1900L0062000220006HFC 4DA1-15NJ-VE4/11F1900L005         0001060005-Z     ADS-VE4/11F1900L0082000220008JX493ZQ4A-476NJ-VE4/11F1900L064                       0001060064ADS-VE4/11F1900L0102000220010JX493ZQ4A-537   104641-7280        NP-VE4/11F1800LNP2495       ADS-VE4/11F1800L012 104641-7280 JX493ZQ8 104641-7172           NP-VE4/11F1800LNP2371ADS-VE4/11F1800L013 104641-7172  JX493ZQ900.02.06.0019               NJ-VE4/11E1800L019ADS-VE4/11E1800L0162000330016JX493ZLQ3A1000.02.06.0025                         NJ-VE4/11E1800L025  ADS-VE4/11E1800L0172000330017JX493ZQ5C11NJ-VE4/12E1650R005ADS-VE4/12E1650R01820003300184D20(486)12NJ-VE4/11E1800L013ADS-VE4/11E1800L01920003300194JB1T1(493)13NJ-VE4/11E1600R015ADS-VE4/11E1600R020200033002048814NJ-VE4/11E1800L047ADS-VE4/11E1800L0222000330022493\4DA1-1B15NJ-VE4/11E1800L008ADS-VE4/11E1800L0232000330023suzl 100P16NJ-VE4/11E1800L024ADS-VE4/11E1800L0242000330024suzl