Edge milling machine with automatic feed engineering 900
Offer type: salePublished: 22.08.2014
| Seller: |  Sharapov Aleksej |
| Phones: |  (8452)760-850 Show phone760-860 Show phone |
| Address: | Russian Federation, Saratovskaya Oblast', Saratov |
Scarfing machine engineering 900 made for handling edges of sheet steel from carbon and stainless steels for welding, Pastores works as a stationary version (on a mobile base for processing edges for welding the workpieces of small and average size that the operator shall manually) and edger engineering-900 works in mobile (for example, on the balancer to handle the edges for welding sheets of large size, located on the desktop).
Edging is done with a special milling cutter with a diameter of 63 mm with five carbide plates. Edger engineering-900 has the automatic document feeder at the edge of the sheet with a speed of 0.6 m/min bevel in one pass operator should not exceed 6 mm
Pastores provides imagery bevel butt weld with depth chamfer from 5 to 28mm, width 45mm, angles from 15° to 45°. The edger is equipped with a special stand on wheels.
When necessary edging on large sheets, edger fix on the very edge of the sheet, the position of the scarfing machine does not require special support on wheels is a standard variant of pastoriza. Scarfing machine engineering-900 has an electronic automatic feed of the sheet in the operating area of the disk milling cutter in a stationary Scarfing machine has a smooth adjustment of the feed rate of material into the treatment area.
Scarfing machine is well-proven in heavy machinery, shipbuilding industry and in factories of metal.
Pastores convenient and simple in operation, for training Your employees to perform the operation of the chamfer on the Edger will not require much time.
Italian factory OMSA for a long time supplies scarfing machine engineering-900 on the Russian market. Equipment for chamfering steel sheets are the main products that this company produces.
Edging is done with a special milling cutter with a diameter of 63 mm with five carbide plates. Edger engineering-900 has the automatic document feeder at the edge of the sheet with a speed of 0.6 m/min bevel in one pass operator should not exceed 6 mm
Pastores provides imagery bevel butt weld with depth chamfer from 5 to 28mm, width 45mm, angles from 15° to 45°. The edger is equipped with a special stand on wheels.
When necessary edging on large sheets, edger fix on the very edge of the sheet, the position of the scarfing machine does not require special support on wheels is a standard variant of pastoriza. Scarfing machine engineering-900 has an electronic automatic feed of the sheet in the operating area of the disk milling cutter in a stationary Scarfing machine has a smooth adjustment of the feed rate of material into the treatment area.
Scarfing machine is well-proven in heavy machinery, shipbuilding industry and in factories of metal.
Pastores convenient and simple in operation, for training Your employees to perform the operation of the chamfer on the Edger will not require much time.
Italian factory OMSA for a long time supplies scarfing machine engineering-900 on the Russian market. Equipment for chamfering steel sheets are the main products that this company produces.
