Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

Dynamometer DPU-20-1

Offer type: salePublished: 23.07.2014
Seller:Valentina Ivanovna
Show phone
Write a message
Address:Ukraine, Sums'ka Oblast'
Dynamometer DPU-20-1 2T (20kn) General purpose (DPO-1, DPU 20-1, DPU-201, DPU-20 1, DPU, DPO 1, DPU 201, DPU 20 1)
Dynamometer DPU-20-1 General purpose is used to measure the static tensile load, calibrated in kN, and is designed to operate at ambient temperatures from -10ºC to +45ºC and relative humidity not more than 60%.
Dimensions - him.
Technical characteristics of the devices dynamometers DPU-20-1 General purpose:
Outside measurements:
- lowest - 2kn(200 kg-force);
- greatest - 20,0 kN(kg, TS);
The multiplier is 0.2 kN(kg)
The limits of the basic reduced error of ±1%;
When removing the load of the dynamometer arrow reading device is set to the zero point with an accuracy of 0.5 rates division of the scale;
The limits of additional error dynamometer DPU-20-1 2T (20kn) caused by changes in ambient temperature in the operating temperature range than the temperature of normal conditions, 0,25 basic error for every 10ºC;
The limit values of the variations in the readings of the dynamometer does not exceed the absolute value of the limit of acceptable basic error;
Response threshold - not more than 0.5% maximum limit of measurement;
Permissible overload - 50% of the maximum limit of measurement;
Weight - not more than 10kg;
Full average life of the instrument DPU-20-1 2T (20kn) not less than 10 years.