Bizator  /  Adverts  /  construction industry  /  building technology and equipment

Multilayer brick making machine, SUMAB EB 940 Sweden

Offer type: sellPublished: 26.06.2023
Show phone
Write a message
High quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors.
The representative of the Swedish company "ScandinavianUK Machines AB" /Sumab/ - invites you to get acquainted with the equipment for the production of concrete and products from it - mobile and stationary concrete plants, vibropresses for the production of paving slabs and curbs.
Equipment for the production of cold asphalt.
Equipment for the production of concrete products - wall panels and blocks, equipment for unloading and storing cement.
As well as equipment for the processing of reinforcing wire and the production of products from reinforcement - mesh, etc.
Delivery of equipment to any region or country.
The manufacturer conducts installation supervision and staff training.
To receive a commercial offer, please send a request to our E-mail.
Block multilayer machine Sumab EB-940
The volume of the rear concrete bunker (loader loading) 1.200 l.
The volume of the rear concrete hopper (conveyor feed) 2.000 l.
Concrete hopper volume (loader loading) 800 l
The volume of the hopper for concrete mix (conveyor feed) 2.000 l.
Loader loading height max. 2.800 mm
Block-track multilayer machine SUMAB EB-940
The following options are included:
Drive unit
vibrating table
2 desktop vibrators
Main plate of the tamper head
2 tamper head vibrators
Filling box
Automatic height adjustment for multi-layer production
Sand spreader
Security features
Valves with proportional control
PLC Siemens S7 and touch panel
Oil radiator
Rigid cladding block
Quick tamper head change device
Hydraulic feed chute shaker in base mix
Telecommunication system with modem
Facemix machine for EB 940 for the production of two-layer products - with a steel plate for pressing products.
* Bunker for fine material
* Box for small material
Each product requires its own mold.
Technical specifications:
Production height
Multi-layer production
Product height min. (Production on a pallet) 50 mm
Product height max. 250 mm
Maximum. cube eight (including pallet) + one layer of product 640mm high
Production of low tables on pallets
Product height max. 600 mm
Production of low tables (demolding on the floor)
Product height max. 650 mm
Production on the floor
Product height max. 1000 mm
Product height min. 250 mm
Machine weight
Without end block and mold 11.7 t
Face block 2.7T
Machine dimensions
Overall length (without end material device) 4400 mm
Overall length (with face material device) 6380 mm
Maximum overall height 3700 mm
Minimum overall height (transition height) 3240 mm
Overall width (with control panel) 2540 mm
Vibration system
Table vibrator / centrifugal force max. 80 kN
Rammer head vibrator / centrifugal force max. 40 kN
Power consumption at max. operation of vibrators 42 kW
Warranty 24 months
To receive a commercial offer, please send an application to our email address.