Device for testing and adjustment of diesel injectors S60H( similar to KI 562)
Offer type: salePublished: 04.09.2018
| Seller: |  Netunaev Andrej |
| Phones: |  (34369) 47351 Show phone 47751 Show phone |
| Address: | Berezovskiy, Russian Federation, Sverdlovskaya Oblast' |
Designed for test and adjustment of the nozzles of diesel engines for stationary and mobile diagnostic and repair facilities.
Technical parameters:
Table with manual transmission
Measuring range pressure, MPa (kgf/cm 2 ) 0...60 (0...600)
Maximum permissible pressure drop, MPa (kgf/cm 2 )1,0 (10)
The limit of the basic reduced error of measurement of pressure, % ±1,5
The fuel supply 3 mm /cycle, not less than 1800
Time pressure drop after reaching 35 MPa (350 kgf/cm 2 ), min 3
Speed measurement, MEAs/cycle 3
Capacity for fuel, l, not less than 0.5
The device price 15000 rubles
Technical parameters:
Table with manual transmission
Measuring range pressure, MPa (kgf/cm 2 ) 0...60 (0...600)
Maximum permissible pressure drop, MPa (kgf/cm 2 )1,0 (10)
The limit of the basic reduced error of measurement of pressure, % ±1,5
The fuel supply 3 mm /cycle, not less than 1800
Time pressure drop after reaching 35 MPa (350 kgf/cm 2 ), min 3
Speed measurement, MEAs/cycle 3
Capacity for fuel, l, not less than 0.5
The device price 15000 rubles
