The camera team CSR -298 voltage of 6 and 10 kV
Offer type: salePublished: 18.06.2013
| Seller: |  Gurvich Mark |
| Phones: |  903-6471471 Show phone |
| Address: | Vladimir, Russian Federation, Vladimirskaya Oblast', Saratovskaya Oblast', Saratov |
Prefabricated CSR 298 are used to complete switchgear three-phase alternating current with frequency of 50 Hz with an isolated or earthed through an arc reactor neutral. Also cameras and cell CSR are used in switchgear transformer substations, including complete transformer substations. The structure is a welded metal structure made of bent steel profiles.
Inside the chamber apparatus main circuits, on the facade of the actuators of switches, disconnectors, as well as the equipment of auxiliary circuits.
The camera is provided through two doors:
the upper zone of the vacuum switch, voltage transformer or fuse;
lower - zone cable connections, power transformer or surge arresters.
The lower door has a viewing window to review the internal part of the camera without removing the voltage.
The upper door is a panel on which is mounted the apparatus of auxiliary circuits. On the facade of the apparatus with the rear wiring on the inner side of the completed layout of the wires. Inside the camera is illuminated by the incandescent lamp.
In the middle of the camera on the facade panel is located terminals serving as a channel for trunk Chinook operational circuit of the electromagnet, the control circuits of the alarm, to perform mezhdurebernyh secondary connections during Assembly of the chamber.
The design of the chamber provides the Assembly chambers in the number of RU and the connection of the main circuits for collecting busbars.
With two-row arrangement of the camera for connecting the main circuit combined tire used tire bridges without disconnectors and disconnectors.
Busbars, busbar and sectional dividers KSO chambers have the front side of the mesh fence.
The design of the chamber provides a mechanical lock that does not allow:
1.enabling and disabling earthing blades and busbar disconnector when a high-voltage switch;
2.working knives disconnectors;
3.the inclusion of disconnectors when grounding the knives;
The camera body CSR allows the direct welding it to a grounded metal structures. On the facade of the camera is a clamp designed to attach to the grounded housing elements, temporarily be ground.
In cameras it is possible to install modern vacuum circuit breakers: "BB/TEL","EVOLIS", "EBP", "WBSK", "WHD-sex". shipment by region (495) 720-70-42; 903-720-70-42 ; 8-903-6471471 http://www.electromarcet.ru Electromarket
Inside the chamber apparatus main circuits, on the facade of the actuators of switches, disconnectors, as well as the equipment of auxiliary circuits.
The camera is provided through two doors:
the upper zone of the vacuum switch, voltage transformer or fuse;
lower - zone cable connections, power transformer or surge arresters.
The lower door has a viewing window to review the internal part of the camera without removing the voltage.
The upper door is a panel on which is mounted the apparatus of auxiliary circuits. On the facade of the apparatus with the rear wiring on the inner side of the completed layout of the wires. Inside the camera is illuminated by the incandescent lamp.
In the middle of the camera on the facade panel is located terminals serving as a channel for trunk Chinook operational circuit of the electromagnet, the control circuits of the alarm, to perform mezhdurebernyh secondary connections during Assembly of the chamber.
The design of the chamber provides the Assembly chambers in the number of RU and the connection of the main circuits for collecting busbars.
With two-row arrangement of the camera for connecting the main circuit combined tire used tire bridges without disconnectors and disconnectors.
Busbars, busbar and sectional dividers KSO chambers have the front side of the mesh fence.
The design of the chamber provides a mechanical lock that does not allow:
1.enabling and disabling earthing blades and busbar disconnector when a high-voltage switch;
2.working knives disconnectors;
3.the inclusion of disconnectors when grounding the knives;
The camera body CSR allows the direct welding it to a grounded metal structures. On the facade of the camera is a clamp designed to attach to the grounded housing elements, temporarily be ground.
In cameras it is possible to install modern vacuum circuit breakers: "BB/TEL","EVOLIS", "EBP", "WBSK", "WHD-sex". shipment by region (495) 720-70-42; 903-720-70-42 ; 8-903-6471471 http://www.electromarcet.ru Electromarket
