The barrier with antikondensat
Offer type: salePublished: 11.06.2013
| Seller: |  Shatsillo Sergej Sergeevich |
| Phones: |  050-293-59-16 096-098-52-70 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovs'kij rajon |
The barrier with antikondensat - waterproofing underlay anti-condensate film is designed to protect against penetration of external moisture as rain and snow, dust and wind in the inner space of the object. Thanks Microperforation allows ventilation of water vapor that penetrates the insulation layer of the roof structure. The film does not rot and pests. Used in all ventilated insulated and non-insulated pitched roofs, and especially in those where the roofing material is metal, corrugated, galvanized sheet and other materials, in which the raw material is metal
The film is fixed, both horizontally and vertically. For this purpose, brackets or stainless steel nails with a flat hat. Fastening to the supporting elements of the roof may be mounting tape K-1, individual sheets of film are also connected to the mounting tape. Installation is made absorbent layer of non-woven textile inside.
Through the use of special absorbent layer, eliminates condensation drip moisture and runoff in the interior of the building or the materials of the insulation.
The underlay film "antikondensat" is a polyethylene film laminated with one side non-woven fabric. The film creates the necessary strength, and special absorbent layer located on the lower side of the film, prevents condensation drip of moisture that is removed from the film surface due to the presence of the ventilation gap under the foil and air flow.
LLC"alpha" 096-098-52-70, 050-293-59-16 Sergey
The film is fixed, both horizontally and vertically. For this purpose, brackets or stainless steel nails with a flat hat. Fastening to the supporting elements of the roof may be mounting tape K-1, individual sheets of film are also connected to the mounting tape. Installation is made absorbent layer of non-woven textile inside.
Through the use of special absorbent layer, eliminates condensation drip moisture and runoff in the interior of the building or the materials of the insulation.
The underlay film "antikondensat" is a polyethylene film laminated with one side non-woven fabric. The film creates the necessary strength, and special absorbent layer located on the lower side of the film, prevents condensation drip of moisture that is removed from the film surface due to the presence of the ventilation gap under the foil and air flow.
LLC"alpha" 096-098-52-70, 050-293-59-16 Sergey
