Edgebander Felder G200 (2011)+aspiration Woodstar (2015)
Offer type: salePublished: 20.05.2017
| Price: | 5 800 $ |
| Seller: |  Zlochevskij Dmitrij |
| Phones: |  0672206145 Show phone |
| Address: | Ukraine, Kyiv |
Sold edgebander Felder G200 b/2011 + aspiration Woodstar DC12 2015. Bargain for the price appropriate!. Sold by the kit. The price is for whole set. We the owners of this equipment!!!
Began to be used in 2012. Was purchased by us in December 2015 then. Us machine was used a bit as volumes in the enterprise had not. Replaced by a milling cutter - a completely new stand. The machine is in perfect condition and ready to work. The last three months is indoors and not used.
Felder G200 is the perfect solution for furnishing machinery small furniture shops: thanks to its compact size and reasonable simplicity of construction, this kravchyk does not require a lot of space to work with, if necessary, can be easily rearranged within an area of industrial premises. A small length of the machine is achieved, mainly due to the pneumatic node of the trimming edge is crosscut unit saws set on edge banding machine industrial grade.
Specifications:
• Electrical equipment 3 x 400 V, 50 Hz
• Edge thickness 0,4 - 2,0 mm;
• Workpiece thickness 10 - 45 mm;
• Feeding speed 5 m/min;
• Heating temperature of the adhesive, the degree 20...250;
• The removal of overhangs on the plate Ø70, z=4, α=15, R=2 mm
• Working table size 1800×300mm;
• Sliding bearing, mm 320 mm;
• Required compressed air pressure 6 bar;
• Overall dimensions (L×W×H) 2040*920(1240)*1260 mm;
• Weight 310 kg
Also for sale:
- panel saw machine Altendorf F45 CE (2004) + duplex + aspiration 2 pouch - 8000.e. (bargain)
Drilling-filler machine MAGGI BORING SYSTEM 21 - 1800.e. (bargain)
- Edge banding machine "RE-20" c auto-cut and auto - feed edge. Used a maximum of 3-4 hours for half a year. The price on the website http://partner.cn.ua/index.php?route=product/product&product_id=134 -33000 UAH. Sell for 27000 UAH. (bargain)
-there are also various manual equipment for furniture production - already at the meeting
Began to be used in 2012. Was purchased by us in December 2015 then. Us machine was used a bit as volumes in the enterprise had not. Replaced by a milling cutter - a completely new stand. The machine is in perfect condition and ready to work. The last three months is indoors and not used.
Felder G200 is the perfect solution for furnishing machinery small furniture shops: thanks to its compact size and reasonable simplicity of construction, this kravchyk does not require a lot of space to work with, if necessary, can be easily rearranged within an area of industrial premises. A small length of the machine is achieved, mainly due to the pneumatic node of the trimming edge is crosscut unit saws set on edge banding machine industrial grade.
Specifications:
• Electrical equipment 3 x 400 V, 50 Hz
• Edge thickness 0,4 - 2,0 mm;
• Workpiece thickness 10 - 45 mm;
• Feeding speed 5 m/min;
• Heating temperature of the adhesive, the degree 20...250;
• The removal of overhangs on the plate Ø70, z=4, α=15, R=2 mm
• Working table size 1800×300mm;
• Sliding bearing, mm 320 mm;
• Required compressed air pressure 6 bar;
• Overall dimensions (L×W×H) 2040*920(1240)*1260 mm;
• Weight 310 kg
Also for sale:
- panel saw machine Altendorf F45 CE (2004) + duplex + aspiration 2 pouch - 8000.e. (bargain)
Drilling-filler machine MAGGI BORING SYSTEM 21 - 1800.e. (bargain)
- Edge banding machine "RE-20" c auto-cut and auto - feed edge. Used a maximum of 3-4 hours for half a year. The price on the website http://partner.cn.ua/index.php?route=product/product&product_id=134 -33000 UAH. Sell for 27000 UAH. (bargain)
-there are also various manual equipment for furniture production - already at the meeting
