DC bridge MO-61
Offer type: salePublished: 01.05.2019
| Price: | 2 000 UAH |
| Company: | Lispriborservis |
| Seller: |  Ivan Valer'evich |
| Phones: |  +380689883427 Show phone |
| Address: | Ukraine, Luhans'ka Oblast', Syevyerodonets'k |
Bridge MO-61 - bridge DC, designed to measure the resistance in the laboratory.
The limits of measurement - 10мкОм - 100mom.
The basic error - from ±0,05% to ±1%.
Resistance of each calibrated wire - 0.01 Ohms±0,0003 Ohms.
Bridges MO-61 are used to measure resistances with very high accuracy. The principle of operation of bridges MO-61 is to ensure that the shoulder of the bridge include the measured resistance and by adjusting the amount of resistance included in another arm of the bridge, reduce the bridge unbalance to zero. Resistance value, resulting equal to the value of measured resistance.
Specifications MO-61
Bridge MO-61 is protected against leakage currents affecting the measurement of high resistances.
Rated power of each resistor arm of the bridge MO-61 resistance from the 1st and more is 0.05 W, resistor - 0.1 Ohm - 5mW, resistor 0.01 Ohm - 5мкВт.
Bridges MO-61 carry power from the following sources:
- built-in device battery cells;
- outdoor battery of appropriate voltage;
- AC 127V/220V.
Bridge MO-61 is designed for operation in the following conditions:
- air temperature of environment from +15ᵒС to +20ᵒС (normal operating temperature is 20ᵒС±2ᵒС);
- relative humidity - less than 80%.
In stock - 1pc.
