Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  compressors, pumps, compressor equipment

The inlet (Receiver) vertical V-2,0-0,8(8,0)

Offer type: salePublished: 18.04.2018
Company:Torgovyij Dom 'KMZ'
Seller:Torgovyij Dom 'KMZ' Kristina Aleksandrovna
Show phone
Write a message
Address:Ukraine, Kirovohrads'ka Oblast'
The inlet (Receiver) vertical V-2,0-0,8(8,0)

Diameter 1m, height of 3.59 m,
pressure 0,785 MPa
The air manifold is equipped standard with bosses and fittings for mounting pressure gauge and safety valve.
Air tanks In-0,5; V-1; V-2; V-3.2 are made of carbon steel st3sp.
Air tanks V-4; 6,3; 8; 10; 16; 20; 25 are made of carbon steel 09G2S.
Standard air tanks are calculated on working pressure up to 0.8 MPa (8 kgf/cm2) and operational temperature range from -60°C to +180 °C.
It is possible to produce air pressure up to 2.5 MPa (25 kgf/cm2)
Lifespan of horizontal and vertical collectors depends on the operating loads and can be up to 20 years.
AIR TANKS VERTICAL: V-1, V-2, V-3.2, V-4, V-10, V-6.3
The air is a tank of cylindrical form, made of metal and is designed to hold compressed air and different gases. The vertical collectors are used to compensation of pulsations of air arising from the operation of stationary compressor. Devices of this kind are often called air receiver, but it is not always correct. Strictly speaking, the usual the inlet is the metal container for air and gas volume from 1 to 80 cubic meters. And the air receiver is the same capacity, but the volume from 0.1 to 0.9 of a cubic meter.
Types of collectors
The vertical tanks are the most common devices. This approach is explained by the fact that vertically mounted the air takes less space. Marking of tanks includes a reference code amount. For example, the inlet 1 has a volume of 1 cubic meter and can be considered as the receiver horizontal installation. But the air manifold 6 3 calculated on the amount 6.3 cubic meters and usually is mounted vertically.
Labelling and regulatory documentation
The air buy today not a problem, but it should clearly to formulate your request. Typical marking is as follows: -4-2-NF1 TU 26-01-1073-90. This means that the intake in 4 with a volume of 4 cubic meter manufactured in accordance with the requirements of TU 26-01-1073-90 and is designed to operate in climatic conditions with the ambient temperature is not below minus 40 °C. Production of were produced in our country is also subject to regulatory document THAT 3615-004-00220322-98

In-2, the Diameter of 1m, height of 3.59 m 0,785 pressure MPa

Product code : In-2,0 Internal volume of 2.0 cubic meters of Working pressure : 0.8 MPa working medium : Air Internal diameter D : 1000 mm Height, H : 2860 mm Length, L : 2200 mm Weight : 570 kg Temperature : from -60 to +180 °C