Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  mechanical equipment

Electromechanical guillotine 20х2200 mod. H-478-01 production Ukraine, Chernigov mechanical plant

Offer type: salePublished: 10.12.2018
Company:Chernigovskij mehanicheskij zavod
Seller:Yurij Vladimirovich
Show phone
Write a message
Address:Chernihivs'ka Oblast', Chernihiv, Ukraine

Video test shears N-478-01 (20х2200) watch on YouTube

Video test shears N-478-01 (20х2200)

Crank sheet shears with the sloped knife H-478-01 designed for direct longitudinal and transverse cutting sheet metal thickness up to 20 mm, a width of 2200 mm with an ultimate tensile 500 MPa (50 kgf/mm.kV.).

Cutting plate is in one move of the knife ( blade beam ) on the markup or on fence. The scissors are operated in enclosed spaces or on outdoor air at ambient temperatures from -20 to +40 degrees C. Can be used in any industries for cutting sheet metal. Final tests each shear under load and certified quality management System guarantees a long and reliable operation of shears in enterprises.

Design features: Electromechanical Drive with rigid couplings incorporating two rotary wedges, which eliminates the consumption of compressed air. Cutting is done for emphasis or markup. Scissors can be equipped with roller conveyors (driven, not driven) to output of the sheet metal.


· The number of clamps, 1 PC

· Electric motor power, kW 40

· The greatest thickness of the sheet at s=50 kgf/sq. mm, 20 mm

· The maximum width of the cut sheet, mm 2200

· The distance between racks in light, mm 2300

· The distance from the edge of the fixed knife to frame (overhang), mm 120

· The distance from the floor to the top plane lower knife, mm 850

· Rotation speed, rpm 1450

· The angle of inclination of the movable knife, deg 2.3

· The stroke of knife 140 mm

· The course contact 30 mm

· The number of strokes per minute, stroke/min 25

· Dimensions, mm 3270x2340x2380

· Weight, kg 12000.


standard equipment:

- rear hand-adjustable stop to 650 mm with the dimensional line,


additional options:

- driven and non-driven roller tables for feeding metal

- sliding trolley for receiving the cut blanks,

- front adjustable with measuring ruler

- front adjustable mitre fence for cutting workpieces the corner

- rear hand-adjustable stop with a measuring range up to 1000 mm,