Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

MPTI, VITP, MITTI class. so 0,4 gauges

Offer type: salePublished: 02.04.2014
Seller:Vigovskij Igor'
Show phone
Show phone
Write a message
Address:Russian Federation, Chelyabinsk, Chelyabinsk
MPTI, VITP, MITTI class. so 0,4 manometers accurate measurements are used to gauge and vacuum pressure non-corrosive, recrystallizes liquids, gas and steam, including oxygen and application in areas of the state metrological control and supervision (GMKN) and the state system of industrial instruments and automation equipment (SSE).
Main technical characteristics:
Outside readings:
MPTI from 0 to 1; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60; 100; 160; 250; 400; 600 kgf/cm2
VITP from -1 to 0 kgf/cm2
MITTI from -1 to 0,6; 1,5; 3; 5; 9; 15; 24 kgf/cm2
By order of the devices are supplied in units of kPa, MPa
Case diameter 160 mm
Accuracy class of devices 0,4
Degree of protection IP53
Weight of the device is not more than 1.5 kg
The average term of service 10 years
Materials details:
housing: aluminum alloy
glass: window
tubular spring: copper alloy, alloy Gelezinkeliai
holder: copper alloy
mechanism: bronze, stainless steel
Devices can withstand the effects of vibration in the frequency range from 5 to 25 Hz with an amplitude of 0.1 mm (group L3 according to GOST 12997-84)
Climatic version
U3 - default devices have execution U2 (working temperature range -50 to +60 °C) according to GOST 15150-69
T3 - order devices have performance T2 (temperature range -50 to +60 °C) according to GOST 15150-69
- //- by default, liquid, steam, gas
"oxygen" is on the order of execution for measuring the pressure of liquid, gaseous oxygen
The threaded connecting fitting
-//- - default metric thread M20 x 1.5-8g
G1/2-B - on the order of inch thread
R1/2 - by order of the conical thread
Technological feature on the scale
-//- - default features
"hell" is on the order of application of technological features on the dial (in note to order be sure to specify at what mark)
-//-- default devices are supplied without damper to 16 kgf/cm2 inclusive and damper than 25 kgf/cm2 inclusive
the damper is on the order of the damper is set to operate with any range of indications
Verify Pribor
- //- by default, the devices are supplied calibrated and attorneys metrological service “Manotom” accredited on calibration of measuring instruments, zaregistrirovannoe in the Register of accredited metrological services under No. 1004.
UCM - on-demand user verification can be done by the state authority for standardization and Metrology - Tomsk UCM.
Periodic verification of the devices during operation is performed in accordance with MI 2124-90.
The calibration interval is 1 year.