Hydraulic bending machine SteelBend (China)

Hydraulic press brake SteelBend CNC two axis (X+Y) Estun 21 ES:

 

· Hydraulic press brake SteelBend designed for bending sheet metal vertically movable crosshead with a hydraulic drive.

· Automatic positioning of axes X and Yis set using the controller Estun E21's.

· Welded the frame is subjected to heat treatment and vibrosauna

· Hydraulic synchronization of work cylinders

· Motorized the system will move the back stops, equipped with ball screw, can achieve high the quality of the bending angle.

· Powerful hydraulic cylinder and reliable hydraulic system with components supplied by Bosch-Rexroth (Germany) allow flexible operation at high speed.

· Tempered and polished tools of standard type or made on special order, provide a wide range of types of products obtained.

· Electrician and electronics from Schneider Electric.

·

Hydraulic folding SteelBendsimple and reliable in operation and maintenance.

In the folding we use only the most reliable package contents:

1. Main motor – Siemens (Germany)

2. Hydraulics – Bosch-Rexroth (Germany)

3. O ring – NOK (Japan)

4. Ball screw – Hwin (Taiwan)

5. Frequency inverter Delta (Taiwan)

6. Foot switch Kacon (Japan)

7. Connecting fittings – EMB (Germany)

8. Hydraulic pump – Sunny (USA)

9. Electrician – SCHNEIDER (France)

 

Main features:

• Welded steel structure subjected to heat treatment and vibrosauna

• Remote control panel with control system E21's, with the ability to control the X-and Y-memory for 40 programs with 25 steps in the program.

• Counter function details

• Hydraulic cylinders — hardened, polished, chrome

• The hydraulic drive provides low the noise of the

• Protection hydraulic and electric overload

• Motorized rear-wheel drive with precision positioning — 0.05 mm

• Quick change system of tool Quick Lock

• Side and rear protection

• Foot pedal control

• The tool punch and the matrix — tempered, brushed (86°, R0.6 mm, material: steel 42CrMo
• Manually movable front sheet support

 

 

SteelBend

Nominal stress, tn

30 - 3000

Length desktop, mm

1600 - 12000

Distance between the columns, mm

950 - 11000

Maximum the height of opening, mm

320 - 800

Depth the cutout in the frame

230 - 600

The course punch, mm

100 - 400

The course back stop, mm

300 - 1000

Rear stops,

2 - 12

Power main engine, kW

3 – 2*55

 

Safety standard:

· Standards: 1.EN 12622: 2009 + A1: 2013 2.EN ISO 12100: 2010 3.EN 60204-1: 2006 + A1: 2009

• Protection fingers (safety light curtains)

• Foot switch KACON (South Korea) (protection 4)

• Rear metal protective cover - CE standard

• Safety the relay is controlled by the pedal, protection

• Disable of the bending machine when you open the electrical Cabinet

• Rules safety (2006/42 / EC):

Estun E21 NC System management:

• Management rear wheel drive

• Management the main engine or inverter

• Intellectual positioning

• Counting details

• Memory 40 programs, 25 steps per program

• Unilateral positioning

• Backup backup / restore data

• mm / inch

• Chinese / English

Options:

· System control Estun E200. Delem DA41'S

· CNC Delem (Holland)/Cybelec (Switzerland) – control up to 6+1 axes

· Laser protection – DSP (Italy)

· Front protection for solar cells

· Rear protection for solar cells

· Hydraulic and Electromechanical zombirovanii

· System cooling

· System tool holders, punches, matrices