Lift warehouse, the Store under the order. Hoists electric. Design, Fabrication, Installation of g/p to 6300 kg.
| Price: | negotiated |
| Company: | OOO UKRMETPROMTEH. Rabotaem po vsej Ukraine! |
| Seller: |  Zablotskaya Svetlana Nikolaevna |
| Phones: |  0671838611 Show phone 0509451628 Show phone |
| Address: | Kharkivs'ka Oblast', Kharkiv, Ukraine |
MADE MINE KLETEVOJ ELECTRIC HOIST BASED ON THE REQUIREMENTS AND TECHNICAL CHARACTERISTICS REQUIRED BY THE CUSTOMER
Technical characteristics of the lift.
PGSH-500-3-2-U2
1.Lift truck electrical unit inside the building
2.The load capacity of the hoist -500 kg
3.Lifting height – 3000
4.Number of stops – 2
5.Mine – metallic self-supporting casing of the mine (net)
6.Doors – 2 PCs (two leaf swing electric lock is opened manually at each stop)
7.Managing lift – external push-button
8. The dimensions of the loading platform
Length – 1300 mm
Width – 1200 mm
Height – 1300 mm
9.Drive electric hoist (made in Bulgaria):
The nominal power of lift motor: 1.5 kW
Voltage, V – 380
The standard lift speed – 8 m/min
10. System separator is the type wedge tough action to prevent falling of the loading platform, the cage (cabin) in the event of breakage of the traction rope.
11.The actuator lift is installed at the top, at the bottom, in the pit, in agreement with the customer.
It is ready, handed over to the client lifts attached the following list of documents:
1.Specifications for freight lift.
2.Technical passport of construction for g/p = 500 kg
3.Installation manual and operating this hoist.
4.Rules for use of the lift.
5.Set of warning signs table.
6.The schematic circuit diagram
7.The act of technical readiness
8.The act of the quality of work performed
9. Permission for the manufacture and installation of lift
10.The quality certificate on the lift
11.Declaration of conformity to technical regulations.
Production of electric hoists. Lifts: mine, lifts for industrial plants, lifts-elevators for warehouses, cantilever lifts, lifts-elevators service kitchen and restaurant.
The client sends his TK or encouraged to complete the questionnaire on the basis of which calculation of the structure and the cost of the lift.
Term of manufacturing and installation of one lift – from 25 to 35 working days.
Manufacturer of lift from receipt of 75 % Deposit of the total amount. The final payment in the amount of 25% of the actual date of the installation will be completed within 3 (three) banking days, after signing the act of executed works.
The advantages of the lift:
1.Lower price ski lift relative to the lift.
2.Simplicity in maintenance.
3.The possibility of installing a lift of any size inside the building or outside, as in the dead of the mine and erected the frame.
4.Reliable and high-quality turnkey installation
