Bizator  /  Adverts  /  equipment and materials  /  automatic control system

Will sell the Registrar Drive-250 new with storage

Offer type: salePublished: 13.03.2014
Seller:Vigovskij Igor'
Write a message
Address:Russian Federation
Short description
the display of measurement results on a digital display and analog bargrave;
check measurements on disc diagram paper in polar coordinates - marker;
alarm - 4 setpoint output relay contacts.
The types of settings
<more>, <less>, value or rate of change of the parameter, and also <source> the status of the contacts are selected during configuration.
The limits of error of measurement, conversion, signaling (registration)
+ 0,25 (1,0) %
Output current signal
4-20 mA (load 500 Ohms)
Switching capacity of relay contacts
current up to 3 a ~ 220V or DC to 28 V
Power supply external sensors
(24+_2,4), load up to 20 mA
The capacity of the archive
to 2970 values
Turnaround time chart
1; 2; 8; 12; 24; 48; 72; 96; 120; 144; 168; C.
The supply voltage
~ 175-245 V, 50 Hz
under the PID act
Microprocessor-based single-channel devices the DISC-250M are used for measuring, recording, alarm and control of process parameters (temperature, pressure, level, flow, and so on) in metallurgy, power, chemical, petrochemical, oil processing, food processing, pulp and paper and other industries.
temperature from +5 to +50°C, humidity up to 80% at 35°C (UHL 4.2 according to GOST 15150-69)
temperature from +5 to +50°C, humidity up to 98% at 35°C without condensation (About 4.2 according to GOST 15150-69)
Type of protection:
from the front side IP54$
on the back side IP30
no Rekord
universal input
simple and reliable mechanics
high precision measurement
the calibration interval is 2 years