Bizator  /  Adverts  /  package and packing, equipment  /  packaging material and equipment

OST "the Director Astrahan" packing machine Pneumatic-1000 for packaging food and non-food products in 3 suture packages

Offer type: salePublished: 20.01.2017
Seller:Gerasimenko Sergej Viktorovich
Show phone
Write a message
Address:Ukraine, Chernivets'ka Oblast', Chernivtsi
Purpose: For automatic filling and packing in 3 suture packages from a roll of heat-sealing film.
Products: bulk melodyssey and melkograviynye food and materials for technical use.
This equipment can be packaged:
Corn stick, popcorn 50-300 g
- Cereals, sugar, vareniki, pelmeni - up to 5 kg
- Pasta, nuts, oatmeal, seeds - up to 3 kg
- Candy, cookies up to 3 kg
- Washing powder - up to 5 kg
- Pellets, sawdust - up to 3 kg
- Charcoal wood - up to 2 kg
- Sand - up to 5 kg
- Animal feed, fertilizer - up to 5 kg
Packaging materials: Polypropylene BOPP transparent, pearlescent, metallic Laminates, PET+CPP, BOPP+BOPP, BOPP+PE, PET+PE, Triplexes with internal heat-seal film layer Laminated paper. Polyethylene and laminated PE+PE.
Working principle: the product from the hopper on the vibrator channel poured into the weighing hopper. As soon as a specified dose, vibrapods product on this thread stops, is weighing and, if the weight starts the cycle of the package. Products through the tube comes in a package that is sealed and this formation of the next packet. If the dispenser 2 streaming, while waiting or reset the dose from a single thread, on another thread there is a formation of the next dose, and so on, it helps to increase the performance of the machine.
Operator: the Operator falls asleep products in the hopper. Sets the film. Sets the panel control unit mass dose, and other variables. Fold the finished packs in bulk packaging.
Design features: When installing the sealing film to work with polyethylene transverse joints will be not ribbed "euroshow, and 3 mm strip soldered polyethylene. Because of this, you will not be able to install on the transverse seam thermorelay dater. But such a sealing system will allow the machine to work with all types of packaging films, including PE and laminates PE+PE.
For good sealing of the package are used such decisions:
Holding the film separate cold (water cooled) sponges
Rapid cooling of the soldered joints after sealing using a pulse of compressed air
Emphasis is support for the package with the product during its filling and sealing machine
The reduction of dust in the sealing zone at the discharge of the product through a 3-ply tube and force-feed and suction air.
Country of origin Ukraine
Method of soldering a seam constant heat
Batching limit 5000.0 (g)
Maximum performance 1500.0 (PCs/min)
Regulation of the heating temperature soldering site Yes
The changing volumes of the "glasses" of the dispenser Yes
The minimum packet length 50.0 (mm)
The minimum width of the package 100.0 (mm)
The maximum packet length 580.0 (mm)
The maximum width of the package 400.0 (mm)
The packaging material of the multilayer film, polypropylene, polyethylene, double-layer film, the film with two layers of polypropylene, polypropylene-polyethylene film, of a film with two layers of polyethylene, paper-plastic film, plastic film
Power consumption 3.2 (kW)
Air flow 300.0 (liter/min)
Network settings
Voltage 220.0 ()
Frequency 50.0 (GHz)
General settings
Weight 290.0 (kg)
Length 1600.0 (mm)
Width 1500.0 (mm)
Height 2900.0 (mm)
Ordering information
Price: 109 500 UAH.